7WB3126
http://onsemi.com
3
MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage −0.5 to +7.0 V
V
IN
Control Pin Input Voltage −0.5 to +7.0 V
V
I/O
Switch Input / Output Voltage −0.5 to +7.0 V
I
IK
Control Pin DC Input Diode Current V
IN
< GND −50 mA
I
OK
Switch I/O Port DC Diode Current V
I/O
< GND −50 mA
I
O
ON−State Switch Current $128 mA
Continuous Current Through V
CC
or GND $150 mA
I
CC
DC Supply Current Per Supply Pin $150 mA
I
GND
DC Ground Current per Ground Pin $150 mA
T
STG
Storage Temperature Range −65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias 150 °C
q
JA
Thermal Resistance UDFN8 (Note 1)
Micro8
111
392
°C/W
P
D
Power Dissipation in Still Air at 85°C UDFN8
Micro8
1127
319
mW
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
V
ESD
ESD Withstand Voltage Human Body Mode (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
> 2000
> 200
N/A
V
I
LATCHUP
Latchup Performance Above V
CC
and Below GND at 125°C (Note 5) $200 mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA / JESD22−A114−A.
3. Tested to EIA / JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
Positive DC Supply Voltage 4.0 5.5 V
V
IN
Control Pin Input Voltage 0 5.5 V
V
I/O
Switch Input / Output Voltage 0 5.5 V
T
A
Operating Free−Air Temperature −55 +125 °C
Dt/DV
Input Transition Rise or Fall Rate Control Input
Switch I/O
0
0
5
DC
nS/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
