301R332U050GT2

The Types 300 and 301 are the wide-temperature, low-ESR
capacitors for power-supply outputs and UPS battery stiening.
The exceptionally low ESRs enable high ripple-current capability.
With series inductance of 12 to 16 nH and ripple currents to 16
amps one of these capacitors can save by replacing three or four
of the 12.5 mm diameter capacitors routinely at the output of
switching power supplies. Type 300 has three leads for rugged,
reverse-proof mounting, and Type 301 has two leads. Types
300R and 301R deliver even lower ESR and higher ripple.
Highlights
- 4000 hour load life
- Ripple Current to 16 amps
- ESRs to 6 mΩ
- > 90% capacitance at –40 °C
- Replaces multiple capacitors
Specications
Temperature Range –55 °C to +105 °C
Rated Voltage Range 6.3 to 250 Vdc
Capacitance Range 8.2 µF to 33,000 µF
Capacitance Tolerance 6.3 to 100 Vdc; –10 + 75%, 160 to 250 Vdc; –10 +50%
Leakage Current ≤0.5 √CV µA, 4 mA max, 5 minutes
Ripple Current Multipliers Ambient Temperature
Frequency
45 ºC 55 ºC 65 ºC 75 ºC 85 ºC 95 ºC 105 ºC
1.66 1.52 1.37 1.20 1.00 0.75 0.36
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
Type 300/301 55 ºC to 105 ºC Long-Life, Switching Power Grade Radial
High Capacitance and Ultra-Low ESR
50 Hz 60 Hz
120
Hz
360
Hz
1 kHz 5 kHz
10 kHz
& up
Less than .77” Diameter
6.3 & 7.5 V 0.76 0.81 1.00 1.23 1.35 1.41 1.43
10 to 40 V 0.74 0.79 1.00 1.29 1.46 1.55 1.57
50V 0.72 0.78 1.00 1.33 1.54 1.67 1.69
63 & 75 V 0.71 0.76 1.00 1.38 1.64 1.82 1.86
100 to 250 V 0.68 0.74 1.00 1.51 2.00 2.51 2.67
.77” Diameter
6.3 & 7.5 V 0.82 0.86 1.00 1.15 1.21 1.24 1.25
10 to 40 V 0.78 0.83 1.00 1.20 1.30 1.35 1.36
50V 0.76 0.81 1.00 1.25 1.38 1.45 1.47
63 & 75 V 0.74 0.80 1.00 1.28 1.43 1.52 1.54
100 to 250 V 0.76 0.81 1.00 1.24 1.37 1.44 1.46
.895” Diameter
6.3 & 7.5 V 0.82 0.86 1.00 1.14 1.20 1.23 1.24
10 to 40 V 0.80 0.84 1.00 1.17 1.25 1.29 1.30
50V 0.75 0.80 1.00 1.27 1.42 1.50 1.52
63 & 75 V 0.75 0.80 1.00 1.26 1.40 1.48 1.50
100 to 250 V 0.76 0.81 1.00 1.25 1.38 1.46 1.48
1.02” Diameter
6.3 & 7.5 V 0.84 0.88 1.00 1.12 1.17 1.19 1.20
10 to 40 V 0.81 0.86 1.00 1.15 1.22 1.25 1.26
50V 0.76 0.81 1.00 1.23 1.35 1.42 1.44
63 & 75 V 0.77 0.81 1.00 1.23 1.35 1.42 1.44
100 to 250 V 0.76 0.81 1.00 1.24 1.37 1.44 1.46
Please click here to see notice regarding “Longer life non RoHS parts”
Outline Drawing
Type 300/301 55 ºC to 105 ºC Long-Life, Switching Power Grade Radial
High Capacitance and Ultra-Low ESR
Load Life
RoHS, ≥ .77”
RoHS, < .77”
Non-RoHS, < .77”
4000 h at full load at 85 °C
2000 h at full load at 85 °C
4000 h at full load at 85 °C
∆ Capacitance ±20%
ESR 200% of limit
DCL 100% of limit
Shelf Life Test 500 h at 105 °C, capacitance, ESR and DCL, initial requirements
Vibration 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane
300 - 3 leads 152 = 1500 µF M = ±20 6R3 =6.3 V 0 = bare can E = epoxy
Type Capacitance Tolerance Voltage Case Code Insulation Epoxy
301R 333 U 6R3 JS 2 E
Part Numbering System
300R- 3 leads, 102 = 1000 µF T = 10% +50% 063 = 63 Vdc 1 = Polyester
low ESR U = –10 +75% 100 = 100 Vdc 2 = PVC Blank = no epoxy
9 = Polyester w/standos*
301R- 2 leads, low ESR
w/standos*
301A- Laydown 3 leads
*Not available in .77” diameter
0.77”, 0.895” and 1.02” Diameters
0.51”, 0.65” and .73” Diameters
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
NR
Blank = Compliant
NR = Non Compliant
(exceeds Pb)
RoHS
L
L
+0.015
-0.032
.250
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
Case Dimensions
Type 300/301 55 ºC to 105 ºC Long-Life, Switching Power Grade Radial
High Capacitance and Ultra-Low ESR
300 - 3 leads 152 = 1500 µF M = ±20 6R3 =6.3 V 0 = bare can E = epoxy
Type Capacitance Tolerance Voltage Case Code Insulation Epoxy
301R 333 U 6R3 JS 2 E
300R- 3 leads, 102 = 1000 µF T = 10% +50% 063 = 63 Vdc 1 = Polyester
low ESR U = –10 +75% 100 = 100 Vdc 2 = PVC Blank = no epoxy
9 = Polyester w/standos*
*Not available in .77” diameter
Case
Code
Insulated
D ± 0.015 (0.4 mm)
L ± 0.062 (1.6 mm)
D x L
Epoxy endseal
L Max
Bare Can
D ± 0.015 (0.4 mm)
L ± 0.030 (0.8 mm)
D x L
Lead Spacing
Type 300 Type 301
S1 T S2
±0.020(0.5 mm) ±0.020(0.5 mm)
Lead Diameter
dia. AWG
Case Dimensions in Inches
EG .512 x 0.846 0.906 0.492 x 0.787 0.197 0.098 0.197 0.032 20
EK .512 x 1.043 1.142 0.492 x 0.984 0.197 0.098 0.197 0.032 20
EM .512 x 1.102 1.161 0.492 x 1.043 0.197 0.098 0.197 0.032 20
EN .512 x 1.378 1.417 0.492 x 1.319 0.197 0.098 0.197 0.032 20
ER .512 x 1.732 1.791 0.492 x 1.673 0.197 0.098 0.197 0.032 20
FK .650 x 1.043 1.098 0.630 x 0.984 0.295 0.148 0.295 0.032 20
FF .650 x 1.319 1.417 0.630 x 1.260 0.295 0.148 0.295 0.032 20
FQ .650 x 1.476 1.575 0.630 x 1.417 0.295 0.148 0.295 0.032 20
FV .650 x 1.634 1.669 0.630 x 1.575 0.295 0.148 0.295 0.032 20
LQ .728 x 1.476 1.575 0.709 x 1.417 0.295 0.148 0.295 0.032 20
LV .728 x 1.634 1.693 0.709 x 1.575 0.295 0.148 0.295 0.032 20
GE .765 x 1.150 1.212 0.750 x 1.125 0.200 0.300 0.300 0.040 18
GJ .765 x 1.650 1.712 0.750 x 1.625 0.200 0.300 0.300 0.040 18
GL .765 x 2.150 2.212 0.750 x 2.125 0.200 0.300 0.300 0.040 18
GP .765 x 2.650 2.712 0.750 x 2.625 0.200 0.300 0.300 0.040 18
GS .765 x 3.150 3.212 0.750 x 3.125 0.200 0.300 0.300 0.040 18
GT .765 x 3.650 3.712 0.750 x 3.625 0.200 0.300 0.300 0.040 18
HE .890 x 1.150 1.212 0.875 x 1.125 0.300 0.400 0.300 0.040 18
HJ .890 x 1.650 1.712 0.875 x 1.625 0.300 0.400 0.300 0.040 18
HL .890 x 2.150 2.212 0.875 x 2.125 0.300 0.400 0.300 0.040 18
HP .890 x 2.650 2.712 0.875 x 2.625 0.300 0.400 0.300 0.040 18
HS .890 x 3.150 3.212 0.875 x 3.125 0.300 0.400 0.300 0.040 18
HT .890 x 3.650 3.712 0.875 x 3.625 0.300 0.400 0.300 0.040 18
JE 1.015 x 1.150 1.212 1.000 x 1.125 0.300 0.400 0.400 0.040 18
JJ 1.015 x 1.650 1.712 1.000 x 1.625 0.300 0.400 0.400 0.040 18
JL 1.015 x 2.150 2.212 1.000 x 2.125 0.300 0.400 0.400 0.040 18
JP 1.015 x 2.650 2.712 1.000 x 2.625 0.300 0.400 0.400 0.040 18
JS 1.015 x 3.150 3.212 1.000 x 3.125 0.300 0.400 0.400 0.040 18
JT 1.015 x 3.650 3.712 1.000 x 3.625 0.300 0.400 0.400 0.040 18
Case Dimensions in Millimeters
EG 13.0 x 21.5 23 12.5 x 20.0 5.00 2.50 5.00 0.81 20
EK 13.0 x 26.5 29.0 12.5 x 25.0 5.00 2.50 5.00 0.81 20
EM 13.0 x 28.0 29.5 12.5 x 26.5 5.00 2.50 5.00 0.81 20
EN 13.0 x 35.0 36.0 12.5 x 33.5 5.00 2.50 5.00 0.81 20
ER 13.0 x 44.0 45.5 12.5 x 42.5 5.00 2.50 5.00 0.81 20
FK 16.5 x 26.5 27.9 16.0 x 25.0 7.50 3.75 7.50 0.81 20
FF 16.5 x 33.5 36.0 16.0 x 32.0 7.50 3.75 7.50 0.81 20
FQ 16.5 x 37.5 40.0 16.0 x 36.0 7.50 3.75 7.50 0.81 20
FV 16.5 x 41.5 42.4 16.0 x 40.0 7.50 3.75 7.50 0.81 20
LQ 18.5 x 37.5 40.0 18.0 x 36.0 7.50 3.75 7.50 0.81 20
LV 18.5 x 41.5 43.0 18.0 x 40.0 7.50 3.75 7.50 0.81 20
GE 19.4 x 29.2 30.8 19.1 x 28.6 5.08 7.62 7.62 1.02 18
GJ 19.4 x 41.9 43.5 19.1 x 41.3 5.08 7.62 7.62 1.02 18
GL
19.4 x 54.6 56.2 19.1 x 54.0 5.08 7.62 7.62 1.02 18
GP 19.4 x 67.3 68.9 19.1 x 66.7 5.08 7.62 7.62 1.02 18
GS 19.4 x 80.0 81.6 19.1 x 79.4 5.08 7.62 7.62 1.02 18
GT 19.4 x 92.7 94.3 19.1 x 92.1 5.08 7.62 7.62 1.02 18
HE 22.6 x 29.2 30.8 22.2 x 28.6 7.62 10.16 7.62 1.02 18
HJ 22.6 x 41.9 43.5 22.2 x 41.3 7.62 10.16 7.62 1.02 18
HL 22.6 x 54.6 56.2 22.2 x 54.0 7.62 10.16 7.62 1.02 18
HP 22.6 x 67.3 68.9 22.2 x 66.7 7.62 10.16 7.62 1.02 18
HS 22.6 x 80.0 81.6 22.2 x 79.4 7.62 10.16 7.62 1.02 18
HT 22.6 x 92.7 94.3 22.2 x 92.1 7.62 10.16 7.62 1.02 18
JE 25.8 x 29.2 30.8 25.4 x 28.6 7.62 10.16 10.16 1.02 18
JJ 25.8 x 41.9 43.5 25.4 x 41.3 7.62 10.16 10.16 1.02 18
HL 25.8 x 54.6 56.2 25.4 x 54.0 7.62 10.16 10.16 1.02 18
JP 25.8 x 67.3 68.9 25.4 x 66.7 7.62 10.16 10.16 1.02 18
JS 25.8 x 80.0 81.6 25.4 x 79.4 7.62 10.16 10.16 1.02 18
JT 25.8 x 92.7 94.3 25.4 x 92.1 7.62 10.16 10.16 1.02 18

301R332U050GT2

Mfr. #:
Manufacturer:
Cornell Dubilier (CDE)
Description:
Aluminum Electrolytic Capacitors - Radial Leaded 3300uF -10+75% 50V 2 Leads, Low ESR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet