Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for commu-
nications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened
analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization
devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete
components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products;
Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi
is headquartered in Aliso Viejo, Calif., and has approximately 4,800 employees globally. Learn more at www.microsemi.com.
Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
email: sales.support@microsemi.com
www.microsemi.com
©2015–2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other
trademarks and service marks are the property of their respective owners.
VPPD-03982. 1.1. 4/16
MDI
Twisted Pair
Interface
PLL and Analog
LED Interface
10/100/
1000BASE-T
PMA
10/100/
1000BASE-T
PCS
MAC
Interface
(RGMII,
RMII)
Temperature
Diode
8051
Micro
Management
and
Control
Interface
(MDC/MDIO)
Fast Link
Failure
Detection
Engine
Superior PHY and Interface Technology
• 10/100/1000BASE-T Ethernet copper transceiver
(IEEE802.3ab compliant) with Microsemi exclusive non-TDR
based VeriPHY™ cable diagnostics software enables testing
without taking down link or impacting data bandwidth while in
1000BASE-T mode
• Patented line driver with low-EMI voltage mode and integrated
line-side termination resistors
• WOL support using magic packets
• HP Auto-MDIX and manual MDI/MDIX support
• RGMII/RMII MAC interface with widest voltage range support in
the industry: 1.5 V, 1.8 V, 2.5 V, and 3.3 V (LVCMOS)
• Jumbo frame support up to 16 kilobytes with programmable
synchronization FIFOs
• Additional internal FIFO located on ingress side enables
support for EtherCAT
®
applications
Best-in-Class Power Consumption
• EcoEthernet™ 2.0 green energy effi ciency with ActiPHY™,
PerfectReach™, and IEEE 802.3az EEE
• Clause 45 registers to support IEEE 802.3az EEE and
IEEE802.3bf
• Fully optimized power consumption for all link speeds
• 10BASE-Te mode support enables even lower power
consumption than 10BASE-T
Key Specifi cations
• Compliant with IEEE 802.3 (10BASE-T, 10BASE-Te,
100BASE-TX, and 1000BASE-T)
• Supports RGMII (version 1.3) and RMII (version 1.2) at 1.5 V,
1.8 V, 2.5 V, and 3.3 V LVCMOS
• RGMII version 2.0 timing compliant
• Supports clocking from 25 MHz crystal or 25/50/125 MHz
oscillator
• Microcontroller-free confi gurability through hardware strapping
• Optionally reports if a link partner is requesting inline Power
over Ethernet (PoE and PoE+)
• Optional stand-alone capability supports even the most cost-
sensitive Ethernet enabled designs
• Devices support operating temperatures of –40 °C ambient to
125 °C junction or 0 °C ambient to 125 °C junction
• Available in 6 mm x 6 mm, 48-pin single-row QFN package
Related Products
Visit www.microsemi.com for information about these related
products:
• VSC8541/VSC8541-03: Single Port Gigabit Ethernet Copper
PHY with GMII/RGMII/RMII/MII Interface
• VSC8540-03: Single Port Fast Ethernet Copper PHY with
Synchronous Ethernet, RGMII/MII/RMII Interface
• VSC8530-03: Single Port Industrial Grade Fast Ethernet
Copper PHY with RGMII/RMII Interface
VSC8531
Single Port Gigabit Ethernet Copper PHY with RGMII/RMII Interfaces