20 MHz to 500 MHz
IF Gain Block
Data Sheet
ADL5531
Rev. B Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©20072013 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Fixed gain of 20 dB
Operation up to 500 MHz
Input/output internally matched to 50
Integrated bias control circuit
Output IP3
41 dBm at 70 MHz
39 dBm at 190 MHz
Output 1 dB compression: 20.6 dB at 190 MHz
Noise figure: 2.5 dB at 190 MHz
Single 5 V power supply
Small footprint 8-lead LFCSP
ADL5534 20 dB gain dual-channel version
±2 kV ESD (Class 2)
FUNCTIONAL BLOCK DIAGRAM
5 CLIN
8
NC
NC
NC = NO CONNECT
4
6
NC
RFIN 2
7
RFOUT
NC
3
ADL5531
BIAS
CONTRO
L
LINEARIZER
06833-001
NC
1
Figure 1.
GENERAL DESCRIPTION
The ADL5531 is a broadband, fixed-gain, linear amplifier
that operates at frequencies up to 500 MHz. The device can be
used in a wide variety of equipment, including cellular, satellite,
broadband, and instrumentation equipment.
The ADL5531 provides a gain of 20 dB, which is stable over
frequency, temperature, power supply, and from device to device.
This amplifier is single ended and internally matched to 50 Ω.
Only input/output ac coupling capacitors, power supply decoupling
capacitors, and external inductors are required for operation.
The ADL5531 is fabricated on a GaAs HBT process and has
an ESD rating of ±2 kV (Class 2). The device is packaged in an
8-lead 3 mm × 3 mm LFCSP that uses an exposed paddle for
excellent thermal impedance.
The ADL5531 consumes 100 mA on a single 5 V supply and is
fully specified for operation from −40°C to +85°C.
The dual-channel 20 dB gain version, ADL5534, is also available
from Analog Devices, Inc.
ADL5531* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
ADL5531 Evaluation Board
DOCUMENTATION
Application Notes
AN-1363: Meeting Biasing Requirements of Externally
Biased RF/Microwave Amplifiers with Active Bias
Controllers
AN-1389: Recommended Rework Procedure for the Lead
Frame Chip Scale Package (LFCSP)
AN-772: A Design and Manufacturing Guide for the Lead
Frame Chip Scale Package (LFCSP)
Broadband Biasing of Amplifiers General Application Note
MMIC Amplifier Biasing Procedure Application Note
Thermal Management for Surface Mount Components
General Application Note
Data Sheet
ADL5531: 20 MHz to 500 MHz IF Gain Block Data Sheet
TOOLS AND SIMULATIONS
ADI RF Amplifier Library for Agilent ADS
ADIsimPLL™
ADIsimRF
ADL5531 S-Parameters
REFERENCE MATERIALS
Product Selection Guide
RF Source Booklet
DESIGN RESOURCES
ADL5531 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all ADL5531 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
ADL5531 Data Sheet
Rev. B | Page 2 of 12
TABLE OF CONTENTS
Features .............................................................................................. 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Typical Scattering Parameters ..................................................... 4
Absolute Maximum Ratings ............................................................ 5
ESD Caution .................................................................................. 5
Pin Configuration and Function Descriptions ............................. 6
Typical Performance Characteristics ..............................................7
Basic Connections .............................................................................9
Soldering Information and Recommended PCB Land
Pattern .............................................................................................9
Evaluation Board ............................................................................ 10
Outline Dimensions ....................................................................... 11
Ordering Guide .......................................................................... 11
REVISION HISTORY
11/13—Rev. A to Rev. B
Changes to Figure 2 .......................................................................... 6
Added Figure 14, Renumbered Sequentially ................................ 8
8/08—Rev. 0 to Re v. A
Changes to Features Section and General Description
Section ................................................................................................ 1
Added Exposed Pad Notation to Outline Dimensions ............. 11
8/07—Revision 0: Initial Version

ADL5531ACPZ-R7

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
RF Amplifier 20-500MHz IF Gain Block
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet