93AA46AE48
DS20005229C-page 2 2013-2016 Microchip Technology Inc.
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. V
SS ......................................................................................................... -0.6V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied..................................................................................................-40°C to +85°C
ESD protection on all pins........................................................................................................................................≥4kV
TABLE 1-1: DC CHARACTERISTICS
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
DC CHARACTERISTICS
Electrical Characteristics:
Industrial (I): T
A = -40°C to +85°C, VCC = +1.8V to +5.5V
Param.
No.
Symbol Characteristic Min. Typ. Max. Units Conditions
D1 V
IH1 High-Level Input Voltage 2.0 — VCC +1 V VCC ≥ 2.7V
V
IH2 0.7 VCC —VCC +1 V VCC 2.7V
D2 VIL1 Low-Level Input Voltage -0.3 — 0.8 V VCC ≥ 2.7V
VIL2 -0.3 — 0.2 VCC VVCC 2.7V
D3 V
OL1 Low-Level Output Voltage — — 0.4 V IOL = 2.1 mA, VCC =4.5V
VOL2——0.2VIOL =100 µA, VCC =2.5V
D4 VOH1 High-Level Output Voltage 2.4 — — V IOH =-400µA, VCC =4.5V
V
OH2VCC - 0.2 — — V IOH =-100µA, VCC =2.5V
D5 ILI Input Leakage Current — — ±1 µA VIN = VSS or VCC
D6 ILO Output Leakage Current — — ±1 µA VOUT = VSS or VCC
D7 CIN,
C
OUT
Pin Capacitance
(all inputs/outputs)
——7pFVIN/VOUT = 0V (Note 1)
T
A = 25°C, FCLK =1MHz
D8 ICCWRITE Write Current — — 2 mA VCC =5.5V
— 500 — µA V
CC =2.5V
D9 ICCREAD Read Current — — 1 mA FCLK =2MHz, VCC =5.5V
——500µAF
CLK =2MHz, VCC =3.0V
— 100 — µA F
CLK =2MHz, VCC =2.5V
D10 ICCS Standby Current — — 1 µA CLK = CS = 0V
DI = V
SS or VCC (Note 2)
D11 V
POR VCC Voltage Detect — 1.5 — V Note 1
Note 1: This parameter is periodically sampled and not 100% tested.
2: Ready/Busy
status must be cleared from DO; see Section 4.4 “Data Out (DO)”.
