Spec No.JELF243A-0100F-01 P.9/15
MURATA MFG.CO.,LTD
Reference Only
8.Environmental Performance
It shall be soldered on the substrate.
No. Item Specification Test Method
8.1 Heat Resistance Appearance:No damage
Inductance Change: within ±5%
Q Change: within ±20%
Temperature:125°C±2°C
Time:1000h (+48h,0h)
Then measured after exposure in the room
condition for 24h±2h.
8.2 Cold Resistance Temperature:-55°C±2°C
Time:1000h (+48h,-0h)
Then measured after exposure in the room
condition for 24h±2 h.
8.3 Humidity Appearance:No damage
Inductance Change: within ±5%
Q Change: within ±20%
Temperature:70°C±2°C
Humidity:90%(RH) to 95%(RH)
Time:1000h (+48h,-0h)
Then measured after exposure in the room
condition for 24h±2h.
8.4 Temperature
Cycle
1 cycle:
1 step:-55°C±2°C / 30min±3 min
2 step:Ordinary temp. / 10min to 15 min
3 step:+125°C±2°C / 30min±3 min
4 step:Ordinary temp. / 10min to15 min
Total of 10 cycles
Then measured after exposure in the room
condition for 24h±2h.
9.Specification of Packaging
9.1 Appearance and Dimensions of paper tape (8mm-wide)
(in mm)
9.2 Specification of Taping
(1) Packing quantity (standard quantity)
10,000 pcs. / reel
(2) Packing Method
Products shall be packed in the cavity of the base tape and sealed by Cover tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Base tape and Cover tape has no spliced point.
(5) Missing components number
Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater,
and are not continuous. The Specified quantity per reel is kept.
9.3 Pull Strength
Cover tape 5N min.
9.4 Peeling off force of cover tape
Speed of Peeling off 300mm/min
Peeling off force
0.1 to 0.6N
(minimum value is typical)
F
Cover tape
Base tape
165
°
to 180
゜
Direction of feed
2.0±0.05
0.80 max
1.75±0.1
φ1.5±
0.1
0
4.0±0.1
2.0±0.05
3.5±0.05
8.0±0.2
0.75±0.03
1.180±0.03