1 Watt
21-Jan-11
12 4567
0.28
(7.20)
0.02
(0.50)
0.28 (7.20)
0.37
(9.50)
0.12
(3.05)
0.10 (2.54)
0.02
(0.50)
0.01
(0.25)
SIP
Package
0.08
(2.00)
0.76
(19.50)
0.60
(15.24)
0.39
(10.00)
Specification
• Regulated Single Output
• SIP or DIP Package
• Low Ripple & Noise
• 1000 VDC Isolation
• Optional 3000 VDC Isolation
• MTBF 4.2 MHrs
• 3 Year Warranty
IF Series
Input
Input Voltage Range • Nominal ±10%
Input Reflected • 20 mA pk-pk through 12 µH inductor,
Ripple Current 5 Hz to 20 MHz
Input Reverse Voltage • None
Protection
Output
Output Voltage • See table
Minimum Load • None
(3)
Line Regulation • ±0.5% max
Load Regulation • ±0.5% max for a 10-100% load change
(3)
(±1.0% for 3.3 V output)
Setpoint Accuracy • ±2% max
Ripple & Noise • 50 mV pk-pk max, 20 MHz bandwidth
Temperature Coefficient • 0.02%/°C
Maximum Capacitive • 220 µF
Load
General
Efficiency • See table
Isolation Voltage • 1000 VDC standard,
3000 VDC option
(2)
Isolation Resistance • 1000 MΩ min
Isolation Capacitance • 60 pF typical
Switching Frequency • 36-150 kHz variable
MTBF • 4.2 MHrs to MIL-HDBK-217F at 25 °C, GB
Environmental
Operating Temperature • -40 °C to +85 °C (no derating)
Storage Temperature • -40 °C to +125 °C
Case Temperature • +100 °C max
Cooling • Convection-cooled
xppower.com
0.40
(10.16 )
14
10 9
8
1
7
11
DIP
Package
0.40
(10.16)
0.27 (6.85)
0.02
(0.50)
0.01
(0.25)
0.30
(7.62)
0.60
(15.24)
0.30
(7.62)
0.12
(3.05)
0.80
(20.32)
Input Voltage Output Voltage Output Current Efficiency Model Number
(1,2)
5 V
3.3 V 333 mA 57% IF0503S
5.0 V 200 mA 65% IF0505S
9.0 V 111 mA 65% IF0509S
12.0 V 84 mA 68% IF0512S
15.0 V 67 mA 68% IF0515S
12 V
3.3 V 333 mA 57% IF1203S
5.0 V 200 mA 63% IF1205S
9.0 V 111 mA 66% IF1209S
12.0 V 84 mA 68% IF1212S
15.0 V 67 mA 66% IF1215S
24 V
3.3 V 333 mA 60% IF2403S
5.0 V 200 mA 65% IF2405S
9.0 V 111 mA 68% IF2409S
12.0 V 84 mA 68% IF2412S
15.0 V 67 mA 68% IF2415S
Mechanical Details
Pin Standard ‘-H’ Version
1 +Vin +Vin
2 -Vin -Vin
4 -Vout No Pin
5 No Pin -Vout
6 +Vout No Pin
7 No Pin +Vout
Pin Standard ‘-H’ Version
1 -Vin -Vin
7 N.C. N.C.
8 No Pin +Vout
9 +Vout No Pin
10 No Pin -Vout
11 -Vout No Pin
14 +Vin +Vin
1. For DIP package, replace suffix ‘S’ with suffix ‘D’.
2. For 3000 VDC isolation, add suffix ‘-H’.
3. Operation at no load will not damage unit but it may not meet all specifications.
4. All dimensions in inches (mm).
5. Pin pitch tolerance: ±0.014 (±0.35)
6. Case tolerance: ±0.02 (±0.5)
7. Weight: 0.005 lbs (2.4 g)
Notes
DCDC