DO NOT
SCALE FROM
THIS PRINT
.120
REF
3.05
.320 8.13
REF
.300 7.62
REF
.025
SQ REF
0.64
.100 2.54
2°
MAX SWAY
(TYP)
((No OF POS - 1) x .100[2.54])
±.008
[0.20]
"A"
"A"
IPL1-XX-S
FIG 1
IPL1-106-01-XXX-S SHOWN
.240 6.10
REF
+.060[1.52] REF
(No OF POS x .100[2.54])
.100
REF
2.54
.040
REF
1.02
(No OF POS -1)
x .100[2.54] REF
.080
REF
2.03
.010
REF
0.25
TERMINAL OFFSET
FOR POLARIZATION
02
01
C
L
C
L
IPL1-1XX-XX-XXX-S-XX-X-XX
ROW SPECIFICATION
-S: SINGLE (USE IPL1-XX-S)
PLATING SPECIFICATION
-F: FLASH SELECTIVE (USE T-1S64-XX-F)
-L: LIGHT SELECTIVE (USE T-1S64-XX-L)
-S: SELECTIVE (USE T-1S64-XX-S)
-H: HEAVY GOLD (USE T-1S64-XX-H)
-FM: FLASH SELECTIVE/MATTE TIN TAILS (USE T-1S64-XX-F)
-LM: LIGHT SELECTIVE/MATTE TIN TAILS (USE T-1S64-XX-L)
-SM: SELECTIVE/MATTE TIN TAILS (USE T-1S64-XX-S)
-STL: LIGHT SELECTIVE TIN/LEAD (USE T-1S64-XX-STL)
LEAD STYLE
-01: THROUGH HOLE
(USE T-1S64-XX-XX)
-02: SURFACE MOUNT
(SEE FIG. 2, SHT 2)
(USE T-1S64-XX-XX)
-RA: RIGHT ANGLE (SEE FIG 3, SHT 3)
(AVAILABLE WITH -01 LEAD STYLE ONLY)
-02 THRU -25
No OF POSITIONS
OPTION
POLARIZATION OPTION
-K: KEYED POLARIZATION
(USE IPL1-XX-S-K)
(SEE FIG 4, SHEET 3)
(LEAVE BLANK FOR NO POLARIZATION, SAMTEC WILL
ONLY SUPPORT EXISTING BUSINESS AS OF REV J)
PACKAGING OPTION
-TR: TAPE & REEL
(AVAILABLE WITH -02 LEAD STYLE ONLY)
(MUST USE K-DOT-.177-.281-.005)
(SEE FIG 5, SHT 3)
SEE NOTE 7
.215 5.46
REF
2°
MAX SWAY
(TYP)
SECTION "A"-"A"
SEE NOTE 4
T-1S64-07-XXX
CPC
FREQUENCY
THIS SHEET
A
C1, C2, C3,
C5
B
C4
C
D
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[0.3]
2
.XXX:
.005[0.13]
.XXXX:
.0020[0.051]
MATERIAL:
.100[2.54] SINGLE ROW TERMINAL ASSEMBLY
BY:
IPL1-1XX-XX-XXX-S-XX-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
D PURVIS
05/02/2005
3
1
SHEET SCALE: 3:1
STANDARD INSULATOR: LCP UL94-V0, COLOR: BLACK
-K INSULATOR: LCP UL94-V0, COLOR: NATURAL
TERMINAL: PHOS BRONZE
F:\DWG\MISC\MKTG\IPL1-1XX-XX-XXX-S-XX-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM TERMINAL RETENTION: 1 LB [4.45 N].
3. PARTS TO BE MOLDED TO POSITION.
4. POST MUST BE WITHIN .005[0.13] OF EACH OTHER.
5. ALL PIN TO PIN DIMENSIONS TO BE MEASURED
FROM TIP TO TIP.
6. DIMENSION TO BE MEASURED AT BEND.
7. TIP TO BE FLUSH TO .015[0.38] BELOW TOP OF SHROUD.
8. NOTE DELETED.
9. PACKAGE ALL POSITIONS.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION Q
