Applications
• Multi-phase regulators
• Voltage Regulator Module (VRM)
• Portable electronics
• Servers and workstations
• Data networking and storage systems
• Notebook and desktop computers
• Graphics cards and battery power systems
• DCR sensing
Environmental Data
• Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(Range is application specific)
• Solder reflow temperature: J-STD-020D compliant
Packaging
• Supplied in tape and reel packaging, 900 parts per reel, 13” dia. reel
Description
• 125°C maximum total temperature operation
• 11.0 x 8.0 x 4.90mm surface mount package
• Ferrite core material
• High current carrying capacity
• Low core losses
• Controlled DCR tolerance for sensing circuits
• Inductance range from 101nH to 226nH
• Current range from 39 to 81Amps
• Frequency range up to 2MHz
• RoHS compliant
High Current, Low-Profile Power Inductors
FLAT-PAC™ FP1105 Series
05-05-08 BU-SB08211 Page 1 of 4 Data Sheet: 4324
SMD Device
1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10V
rms
, 0.0Adc
2 Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1V
rms
,I
sat
1
3I
rms
: DC current for an approximate temperature rise of 40°C without core loss. Derating is
necessary for AC currents. PCB pad layout, trace thickness and width, air-flow and proximity of
other heat generating components will affect the temperature rise. It is recommended the part
temperature not exceed 125°C under worst case operating conditions verified in the end
application.
4I
sat
1: Peak current for approximately 20% rolloff at +25°C.
5I
sat
2: Peak current for approximately 20% rolloff at +125°C.
6 K-factor: Used to determine B
p-p
for core loss (see graph). B
p-p
= K
*
L
*
ΔI
*
10
-3
,B
p-p
: (Gauss),
K: (K-factor from table), L: (inductance in nH), ΔI (peak-to-peak ripple current in amps).
7 Part Number Definition: FP1105Rx-Rxx-R
• FP1105 = Product code and size • Rx is the DCR indicator
• Rxx= Inductance value in μH, R = decimal point • “-R” suffix = RoHS compliant
Product Specifications
Part Number OCL
1
± 10% (nH) FLL
2
Min. (nH) I
rms
3
(Amps) I
sat
1
4
@ 25°C (Amps) I
sat
2
5
@ 125°C (Amps) DCR (mΩ) @ 20°C K-factor
6
FP1105R1-R10-R 100 72 81 63 467
FP1105R1-R12-R 120 86 66 50 467
FP1105R1-R15-R 150 109 46 54 42 0.35 ± 8.6% 467
FP1105R1-R20-R 192 138 42 34 467
FP1105R1-R22-R 226 163 39 28 467