EVAL-ADUM3151Z

EVAL-ADuM3151Z User Guide UG-720
Figure 5. Top Side Layout
Rev. 0 | Page 7 of 9
UG-720 EVAL-ADuM3151Z User Guide
ORDERING INFORMATION
BILL OF MATERIALS
Table 1. Installed Components
Quantity Reference Designator(s) Value Voltage Tolerance Package Manufacturer/Part Number
1 EVAL-ADuM3151Z Analog Devices, Inc. 08-038567 Rev A
1 U1 SSOP20 Analog Devices, Inc. ADuM3151BRSZ
2 C1, C2 10 µF 6.3 V 10% 0805 Taiyo Yuden JMK212B7106KG-T
2 C2T, C3T 0.1 µF 16 V 5% 0603 Kemet C0603C104J4RACTU
10 JP1 to JP10 Jumper
(3-pin)
1 × 3 pin
header
Harwin M20-9990345
14 P1B to P14B Jumper
(2-pin)
IDC 2×1
IDC 2×1
FCI 90726-402HLF
20 R20, R21, R30, R31, R37,
R38, R43, R44, R49, R50,
R55, R56, R68, R69, R77,
R78, R86, R87, R95, R96
100 1/10 W 1 R0603 Stackpole RMCF0603FT100K
20 R22, R23, R32, R33, R39,
R40, R45, R46, R51, R52,
R57, R58, R70, R71, R79,
R80, R88, R89, R97, R98
10 1% 0603 Panasonic ERJ-3EKF1002V
2 T1, T2 5.08 MM
2 × 1 screw
terminal
block
DIG01 ED2609-ND
Table 2. Optional ComponentsNot Installed
Quantity Reference Designator(s) Value Voltage Tolerance Package Manufacturer/Part Number
4 C1B, C1T, C2B, C4T 0.1 µF 16 V 5% 0603 Kemet C0603C104J4RACTU
16 P1A to P14A, PR1, PR2 Jumper
(2-pin)
1 × 2 pin
header
200 mil
SAMTEC MTSW-202-12-G-S-730 ZZZ
10 C3 to C12 15 pF 50 V 5% 0603 Kemet 15PF 50V 5% 0603 NPO ZZZ
11 MO, SO, MLCK, MSSB,
VDD1, VDD2, AUX1_S1,
AUX1_S2, AUX2_S1,
AUX2_S2, AUX3_S2
SMA
connector
CONN-
PCB coax
SMA end
launch
Johnson 142-0701-851
18 R1 to R10, R61, R62, R74,
R75, R84, R85, R93, R94
100 Ω 1/10 W 1 R0805 Panasonic ERJ-6ENF1000V
40 R11 to R19, R24 to R29,
R34 to R36, R41, R42, R47,
R48, R53, R54, R59, R60,
R63 to R67, R72, R73, R76,
R81 to R83, R90 to R92
0 Ω 1/10 W 1 R0603 Panasonic ERJ-3GEY0R00V
Rev. 0 | Page 8 of 9
EVAL-ADuM3151Z User Guide UG-720
Rev. 0 | Page 9 of 9
RELATED LINKS
Resource Description
ADuM3151 Product Page, 3.75 kV, 7-Channel SPIsolator Digital Isolators for SPI
ADuM3152 Product Page, 3.75 kV, 7-Channel SPIsolator Digital Isolators for SPI
ADuM3153 Product Page, 3.75 kV, 7-Channel SPIsolator Digital Isolators for SPI
AN-1109 Application Note, Recommendations for Control of Radiated Emissions with iCoupler Devices
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2014 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG12437-0-7/14(0)

EVAL-ADUM3151Z

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
ADuM3151ARSZ/ADuM3151BRSZ/ADuM3152ARSZ/ADuM3152BRSZ/ADuM3153ARSZ/ADuM3153BRSZ Digital Isolator Evaluation Kit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet