DS1044
4–in–1 High–Speed Silicon Delay Line
DS1044
021798 1/6
FEATURES
• All–silicon timing circuit
• Four independent buffered delays
• Initial delay tolerance ±1.5 ns
• Stable and precise over temperature and voltage
• Leading and trailing edge precision preserves the
input symmetry
• Standard 14–pin DIP, 14–pin SOIC (150 mil)
• Vapor phase, IR and wave solderable
• Available in Tape and Reel
PIN ASSIGNMENT
V
CC
1
2
3
4
5
6
7
14
13
12
11
10
9
8
NC
OUT1
NC
OUT2
OUT3
OUT4
IN1
NC
IN2
IN3
IN4
NC
GND
DS1044 14–PIN DIP
DS1044R 14–PIN SOIC (150 MIL)
See Mech. Drawings
Section
PIN DESCRIPTION
IN1–IN4 – Input Signals
OUT1–OUT4 – Output Signals
NC – No Connection
V
CC
– +5 Volt Supply
GND – Ground
DESCRIPTION
The DS1044 series is a 4–in–1 version of the low–
power, +5 Volt, high speed, DS1035.
The DS1044 series of delay lines have four independent
logic buffered delays in a single package. The device is
Dallas Semiconductor’s fastest 4–in–1 delay line. It is
available in a standard 14–pin DIP and 14–pin SOIC.
The device features precise leading and trailing edge
accuracies. It has the inherent reliability of an all–silicon
delay line solution. The DS1044’s nominal tolerance is
±1.5 ns and an additional tolerance over temperature
and voltage of ±1.0 ns for the faster delays. Each output
is capable of driving up to 10 LS loads.
Standard delay values are indicated in Table 1. Cus-
tomers may contact Dallas Semiconductor at (972)
371–4348 for further information.