ZL40203 Data Sheet
6
Microsemi Corporation
2.0 Pin Description
Pin # Name Description
1, 4 clk_p, clk_n, Differential Input (Analog Input). Differential (or singled ended) input signals. For all
input signal configuration see section 3.1, “Clock Inputs“ on page 6
15,14,
12, 11,
10, 9,
7, 6
out0_p, out0_n
out1_p, out1_n
out2_p, out2_n
out3_p, out3_n
Differential Output (Analog Output). Differential outputs.
8, 13 vdd Positive Supply Voltage. 2.5 V
DC
or 3.3 V
DC
nominal.
5, 16 gnd Ground. 0 V.
2vtOn-Chip Input Termination Node (Analog). Center tap between internal 50 Ohm
termination resistors.
See section 3.1, “Clock Inputs“ on page 6 for more information.
3ctrlDigital Control for On-Chip Input Termination (Input). Selects differential input mode;
0: DC coupled modes
1: AC coupled differential modes
These pins are internally pulled down to GND.
See section 3.1, “Clock Inputs“ on page 6 for more information.