https://www.phoenixcontact.com/us/produkte/2838228
05.10.2012Page3/7
Surge protection connector-PT 2X2-24DC-ST-2838228
Technical data
Protective circuit
Residual voltage at In, (conductor-GND) ≤ 450 V
Residual voltage with Ian (10/1000)µs (conductor-conductor) ≤ 50 V
Protection level UP (Core-Core) ≤ 50 V (C3 - 25 A)
Response time tA (Core-Core) ≤ 1 ns
Response time tA (Core-Earth) ≤ 100 ns
Input attenuation aE, sym. 0.5 dB (≤ 1 MHz)
Cut-off frequency fg (3 dB), sym. in 50 Ohm system Typ. 6 MHz
Capacity (Core-Core) 1.4 nF
Resistance in series 2.2 Ω (Path 1-2/5-6)
Resistance in series 2.2 Ω (Path 7-8, 11-12)
Message: Surge protection fault None
Max. required back-up fuse 500 mA (e.g. T ( IEC 127-2/III))
Surge carrying capacity in acc. with IEC 61643-21 (Core-Core) C2 (10 kV/5 kA)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Core) C3 (25 A)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Earth) C2 (10 kV/5 kA)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Earth) D1 (2.5 kA)
Connection data
Connection method Screw connection (in connection with the base element)
Connection type IN PLUGTRAB plug-in system
Connection type OUT PLUGTRAB plug-in system
Screw thread M3
Tightening torque 0.8 Nm
Stripping length 8 mm
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Connection, protective circuit
Standards/regulations IEC 61643-21
Standards/regulations DIN EN 61643-21
Standards/regulations UL 497B
Classifications
eclass
eCl@ss 4.0 27140201
eCl@ss 4.1 27130801
eCl@ss 5.0 27130801
eCl@ss 5.1 27130801
eCl@ss 6.0 27130807