D5B-8023

CSM_D5B_DS_E_3_2
1
Mechanical Touch Switch
D5B
Detects Objects in Multiple Directions
with High Sensitivity, Ideal for Robotics
Slow-action switching mechanism used.
Gold-plated contact with coil spring capable of switching
micro current/voltage load while providing high contact
reliability.
Inputs directly to microcomputers and programmable
controllers.
Three sizes (M10, M8, and M5) and three types of compact
actuators.
Easy panel mounting.
Be sure to read Safety Precautions on page 4 and Safety Precautions for
All Limit Switches.
Model Number Structure
Model Number Legend
D5B-@@@
(1) (2)(3)
Ordering Information
Type M5 M8 M10
Actuator Cable length (m) Model Model
Hemispheric actuator
1
D5B-5011 D5B-8011 D5B-1011
3
D5B-5013 D5B-8013 D5B-1013
5
D5B-5015 D5B-8015 D5B-1015
Cone-shaped actuator
1
D5B-5021 D5B-8021 D5B-1021
3
D5B-5023 D5B-8023 D5B-1023
5
D5B-5025 D5B-8025 D5B-1025
Wobble
stick
actuator
Short
spring
1
D5B-5511 D5B-8511 D5B-1511
3
D5B-5513 D5B-8513 D5B-1513
5
D5B-5515 D5B-8515 D5B-1515
Long
spring
1
--- ---
D5B-1531
3
D5B-1533
5
D5B-1535
(1) Size
5: M5
8: M8
1: M10
(2) Actuator
01: Hemispheric
02: Cone-shaped
51: Wobble stick (short spring)
53: Wobble stick (long spring). Only with the M10 type.
(3) Cable length
1: 1 m
3: 3 m
5: 5 m
2
D5B
Specifications
Structure and Nomenclature
Structure Contact Form
Note: Specifications for normally open (N.O.) contacts are not available.
Dimensions and Operating Characteristics (Unit: mm)
Dimensions
M5 Type (The square @ in the models represents the cable length. Refer to Ordering Information.)
Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The threads of the case are not standard; 0.5-mm pitch. Therefore standard tapping to the case is not possible for mounting.
Rat
i
ngs
Characteristics
Electrical ratings
1 mA at 5 VDC to 30 mA at 30 VDC (resistive load)
Degree of protection IP67
Durability *1
Mechanical 10,000,000 operations min.
Electrical 5,000,000 operations min. (at 30 mA 30 VDC resistive load)
Operating speed 5 to 500 mm/s
Operating
frequency
Mechanical 120 operations/min.
Electrical 60 operations/min.
Insulation resistance
100 MΩ min. at 250 VDC between each terminal and
non-current-carrying metal parts
Contact resistance
With 1 m cable:700 mΩ max. (initial value)
With 3 m cable:1.9 Ω max. (initial value)
With 5 m cable:3.1 Ω max. (initial value)
Dielectric
strength
(50/60 Hz
1min)
Between terminals of
same polarity
250 VAC (at TTP)
Between each terminal
and non-current-carrying
metal parts
1,000 VAC (600 VAC for M5 model)
Vibration
resistance
Malfunction 10 to 55 Hz, 1.5-mm double amplitude *2
Shock
resistance
Mechanical 1,000 m/s
2
max.
Malfunction 300 m/s
2
max. *3
Ambient operating temperature 10°C to +70°C (with no icing)
Ambient operating humidity 35% to 95%RH
Actuator strength 14.7 N *4
Weight
Switch M5: Approx. 14 g, M8: Approx. 20 g, M10: Approx. 21 g
Cable Approx. 10 g/m
Eng
i
neer
i
ng Data
Electrical Durability (cosφ=1)
(Operating temperature: +5
°
C to +35
°
C,
Operating humidity: 40% to 70%RH.)
3,000
1,000
5,000
300
200
100
700
500
0
10 20 30 4
0
Switching current (mA)
Durability (×10
4
operations)
30 VDC
Note: The above figures are initial values.
*1.
Durability values are calculated at an operating
temperature of +5°C to +35°C, and an operating
humidity of 40% to 70%RH.
C
ontact your OMRON sales representative for more
detailed information on other operating environments.
*2. 16.7 Hz, 1-mm double amplitude for wobble stick models.
*3. 50 m/s
2
max. for wobble stick models.
*4. Excluding the wobble stick models.
Reset spring
Mounting nut
Axis
Cable
(V-HKCVV)
ResinBase
Case (PBT)
Reset spring
Actuator
(POM)
Rubber boot
(NBR)
Plunger
(POM)
Brown
Blue
(Normally closed contact)
2.5
2.15
(Rising part of the ball)
Clamping nut
Toothed lock washer
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductors
(see note 2)
M5 × 0.5
(Ball 2.15R)
4.3 dia.
Resin plunger
2.4
5.9
16.2
(24.5)
8
(9.2)
*
* Operating characteristics (X, Y) measuring position
D5B-501@
2.5
1
Clamping nut
Toothed lock washer
0.5R
4.3 dia.
Resin plunger
5.94.9
16.2
(27)
8
(9.2)
*
* Operating characteristics (X, Y) measuring position
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductors
(see note 2)
M5 × 0.5
D5B-502@
2.5
5
Clamping nut
Toothed lock washer
4.3
dia.
6
41.9
±
2
16.2
(64.1)
8
(9.2)
*
2.3
dia.
0.4
dia.
6.9
±
2
2
Stainless steel wire
* Operating characteristics (X, Y) measuring position
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductors
(see note 2)
M5 × 0.5
D5B-551@
3
D5B
M8 Type
M10 Type
Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The threads of the case are not standard; 0.5-mm pitch. Therefore standard tapping to the case is not possible for mounting.
13
(15)
Resin plunger
7 dia.
(Ball 3.5R)
3.5
(Rising part of the ball)
2.5
Clamping nut
Toothed lock washer
*
16.7
7.3
4
(28)
* Operatin
g
characteristics (X, Y) measurin
g
position
(see note 2)
M8 × 0.5
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductors
D5B-801@
13
(15)
Resin plunger
7 dia.
0.8R
1
2.5
Clamping nut
Toothed lock washer
*
16.7
7.3
8.5
(32.5)
* Operating characteristics (X, Y) measuring position
(see note 2)
M8 × 0.5
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductors
D5B-802@
13
(15)
Stainless
steel wire
7 dia.
3.9 dia.
5
2.5
Clamping nut
Toothed lock washer
*
16.7
7.3
(92.8)
3
0.6
dia.
* Operating characteristics (X, Y) measuring position
(see note 2)
M8 × 0.5
68.8
±2
11.8
±2
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductors
D5B-851@
13
1518 dia.
Resin plunger
9 dia.
Ball 4.5R
4.5
(Rising part of the ball)
2.5
5.5
7.3
Clamping nut
Toothed lock washer
20.5
(33.3)
*
* Operating characteristics (X, Y) measuring position
(see note 2)
M10 × 0.5
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductor
s
D5B-101@
13
1518 dia.
Stainless
steel wire
9 dia.
4.6 dia.
0.6
dia.
5513.3
2.5
83.3
7.3
Clamping nut
Toothed lock washer
20.5
(111.1)
*
* Operating characteristics (X, Y) measuring position
(see note 2)
M10 × 0.5
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductors
D5B-151@
13
1518 dia.
Resin plunger
9 dia.
0.9R
2.5
11.5
7.3
Clamping nut
Toothed lock washer
20.5
(39.3)
*
1
* Operating characteristics (X, Y) measuring position
(see note 2)
M10 × 0.5
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductor
s
D5B-102@
13
1518 dia.
Stainless
steel wire
9 dia.
4.6 dia.
0.6
dia.
5533.3
2.5
83.3
7.3
Clamping nut
Toothed lock washer
20.5
(111.1)
*
* Operating characteristics (X, Y) measuring position
(see note 2)
M10 × 0.5
S-FLEX V-HKCVV
equal level, 3 dia.
0.08 mm
2
Two conductor
s
D5B-153@

D5B-8023

Mfr. #:
Manufacturer:
Description:
Limit Switches INDUSTRIAL SWITCH
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union