OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

NJG1532KB2-TE2

P1-P3P4-P6P7-P9P10-P11
NJG1532KB2
- 1 -
SPDT SWITCH GaAs MMIC
nGENERAL DESCRIPTION nPACKAGE OUTLINE
NJG1532KB2 is a GaAs SPDT switch suited for RF
receiving circuit of cellular phone handsets.
This switch features very low loss, high isolation and
exhibits wide operating frequency range from 50MHz to
3.0GHz at low voltage of 2.5V.
The ultra small & ultra thin FLP6 package is applied.
Reversed logic version of this device is NJG1522KB2.
nFEATURES
lSingle low voltage control +2.5~+6.5V
lLow insertion loss 0.3dB typ. @f=1GHz, P
IN
=0dBm
0.5dB typ. @f=2GHz, P
IN
=0dBm
lHigh isolation 27dB typ. @f=1~2GHz, P
IN
=0dBm
lHandling power 20dBm max. @f=2GHz, V
CTL
=2.7V
lLow current consumption 8uA typ. @f=2GHz, P
IN
=10dBm
lUltra small & ultra thin package FLP6-B2 (Package size: 2.0x2.1x0.75mm)
nPIN CONFIGURATION
nTRUTH TABLE
VCTL1 H L L H
VCTL2 L H L H
PC-P1 OFF ON
Insertion Loss=17dB
P1 Return Loss=-2dB
Insertion Loss=18dB
P1 Return Loss=-2dB
PC-P2 ON OFF
Insertion Loss=17dB
P2 Return Loss=-2dB
Insertion Loss=18dB
P2 Return Loss=-2dB
“H”=V
CTL (H),
“L”=V
CTL (L)
NJG1532KB2
Note: Reversed logic version of this device is NJG1522KB2.
The values of insertion losses and return losses are the typical values at 2GHz.
KB2 Type
Top view
3
2
1
4
5
6
Pin connection
1.P1
2.GND
3.P2
4.VCTL2
5.PC
6.VCTL1
Orientation Mark
NJG1532KB2
- 2 -
n
ABSOLUTE MAXIMUM RATINGS
(T
a
=25°C, Z
S
=Z
l
=50Ω)
PARAMETERS SYMBOL CONDITIONS RATINGS UNITS
Input Power P
in
V
CTL (L)
=0V, V
CTL (H)
=2.7V 28 dBm
Control Voltage V
CTL
V
CTL (H)
- V
CTL (L)
7.5 V
Power Dissipation P
D
450 mW
Operating Temp. T
opr
-30~+85 °C
Storage Temp. T
stg
-55~+125 °C
n
ELECTRICAL CHARACTERISTICS
(V
CTL (L)
=0V, V
CTL (H)
=2.7V, Z
S
=Z
l
=50Ω, T
a
=25°C)
PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS
Control voltage (Low) V
CTL (L)
-0.2 0 0.2 V
Control voltage (High) V
CTL (H)
2.5 2.7 6.5 V
Control current I
CTL
f=2.0GHz, P
IN
=10dBm - 8 14 uA
Insertion loss 1 LOSS1 f=1.0GHz, P
IN
=0dBm - 0.3 0.6 dB
Insertion loss 2 LOSS2 f=2.0GHz, P
IN
=0dBm - 0.5 0.8 dB
Isolation 1
(PC-P1, PC-P2, P1-P2)
ISL1 f=1.0GHz, P
IN
=0dBm 25.5 27 - dB
Isolation 2
(PC-P1, PC-P2, P1-P2)
ISL2 f=2.0GHz, P
IN
=0dBm 25 27 - dB
Pin at 1dB
compression point
P
-1dB
f=2.0GHz 20 24 - dBm
VSWR (PC, P1, P2) VSWR f=0.05~2.2GHz, ON State - 1.3 1.6
Switching time T
SW
f=0.05~2.5GHz - 20 - ns
NJG1532KB2
- 3 -
nTERMINAL INFORMATION
No. SYMBOL DESCRIPTIONS
1 P1
RF port. This port is connected with PC port by controlling 6
th
pin (V
CTL (H)
)
to 2.5~6.5V and 6
th
pin(V
CTL(L)
) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit. (50~100MHz:
0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF)
2 GND
Ground terminal. Please connect this terminal with ground plane as close
as possible for excellent RF performance.
3 P2
RF port. This port is connected with PC port by controlling 4
th
pin (V
CTL(H)
)
to 2.5~6.5V and 4
th
pin(V
CTL(L)
) to -0.2~+0.2V. An external capacitor is
required to block the DC bias voltage of internal circuit. (50~100MHz:
0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF)
4 VCTL2
Control port 2. The voltage of this port controls PC to P1 state. The ‘ON’
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 6
th
pin have
to be set to opposite state. The bypass capacitor has to be chosen to
reduce switching time delay from 10pF~1000pF range.
5 PC
Common RF port. In order to block the DC bias voltage of internal circuit,
an external capacitor is required. (50~100MHz: 0.01uF, 0.1~0.5GHz:
1000pF, 0.5~2.5GHz: 56pF)
6 VCTL1
Control port 1. The voltage of this port controls PC to P2 state. The ‘ON’
and ‘OFF’ state is toggled by controlling voltage of this terminal such as
high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 4
th
pin have
to be set to opposite state. The bypass capacitor has to be chosen to
reduce switching time delay from 10pF~1000pF range.
P1-P3P4-P6P7-P9P10-P11

NJG1532KB2-TE2

Mfr. #:
Buy NJG1532KB2-TE2
Manufacturer:
NJR (New Japan Radio)
Description:
RF Switch ICs SPDT Switch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet