MAX504/MAX515
5V, Low-Power, Voltage-Output
Serial 10-Bit DACs
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
V
DD
to DGND and V
DD
to AGND................................-0.3V, +6V
V
SS
to DGND and V
SS
to AGND .................................-6V, +0.3V
V
DD
to V
SS
.................................................................-0.3V, +12V
AGND to DGND........................................................-0.3V, +0.3V
Digital Input Voltage to DGND ......................-0.3V, (V
DD
+ 0.3V)
REFIN ..................................................(V
SS
- 0.3V), (V
DD
+ 0.3V)
REFOUT to AGND .........................................-0.3V, (V
DD
+ 0.3V)
RFB .....................................................(V
SS
- 0.3V), (V
DD
+ 0.3V)
BIPOFF................................................(V
SS
- 0.3V), (V
DD
+ 0.3V)
V
OUT
(Note 1) ................................................................V
SS
, V
DD
Continuous Current, Any Pin................................-20mA, +20mA
Continuous Power Dissipation (T
A
= +70°C)
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) .....727mW
8-Pin SO (derate 5.88mW/°C above +70°C)..................471mW
14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)..... 800mW
14-Pin SO (derate 8.33mW/°C above +70°C)................667mW
Operating Temperature Ranges
MAX5_ _C_ _.........................................................0°C to +70°C
MAX5_ _E_ _......................................................-40°C to +85°C
Storage Temperature Range.............................-65°C to +165°C
Lead Temperature (soldering, 10sec).............................+300°C
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V
DD
= 5V, V
SS
= 0V, AGND = DGND = 0V, REFIN = 2.048V (external), RFB = BIPOFF = VOUT (MAX504), C
REFOUT
= 33µF (MAX504),
R
L
= 10kΩ, C
L
= 100pF, T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
PARAMETER SYMBOL MIN TYP MAX UNITS
Unipolar Offset Error V
OS
0 3 LSB
Differential Nonlinearity DNL ±1 LSB
Unipolar Offset Tempco TCV
OS
3 ppm/°C
Gain Error (Note 2) GE ±1 LSB
Resolution N 10 Bits
Gain-Error Tempco 1 ppm/°C
Gain-Error Power-Supply
Rejection Ratio
PSRR 0.1 LSB/V
0 V
DD
- 2
Output Voltage Range
0 V
DD
- 0.4
V
Output Load Regulation 0.5 LSB
Short-Circuit Current I
SC
12 mA
Voltage Range 0 V
DD
- 2 V
Input Resistance 40 kΩ
Input Capacitance 10 50 pF
AC Feedthrough -80 dB
CONDITIONS
Guaranteed monotonic
4.5V ≤ V
DD
≤ 5.5V
MAX504 (G = 1)
MAX504 (G = 2), MAX515
VOUT = 2V, R
L
= 2kΩ
Code dependent, minimum at code 0101...
Code dependent (Note 3)
REFIN = 1kHz, 2Vp-p
Note 1: The output may be shorted to V
DD
, V
SS
,
or AGND if the package power dissipation limit is not exceeded.
Relative Accuracy (Note 2) INL ±0.5 LSB
Unipolar Offset-Error
Power-Supply Rejection Ratio
PSRR 0.1 LSB/V4.5V ≤ V
DD
≤ 5.5V
REFERENCE INPUT (REFIN)
VOLTAGE OUTPUT (V
OUT
)
STATIC PERFORMANCE
