QUINT POWER provides:
•
Preventive function monitoring
through
professional signaling
•
Global use
due to a wide range input
•
A high level of operational safety
even in complex
global networks
•
Reliable startup of heavy loads
due to
POWER BOOST
The reliability of a power supply determines the
availability of individual components in a system and
whether complex systems can function safely.
The globalization of markets increases the demands
placed on the power supply. A wide range input and a
high level of availability are required.
These requirements are met by Generation 2
QUINT POWER.
1. Short Description
QUINT POWER is the universal 24 V supply of 60 -
960 W. Output currents of 2.5, 5, 10, 20, 30, and 40 A
are available at an adjustable and regulated output
voltage of 22.5 - 28.5 V DC. Output currents of 5 A and
10 A are available for use in potentially explosive areas
of zone 2.
These devices, which are designed as primary
switched-mode regulators, operate with a high level of
efficiency so that heat loss is kept to a minimum.
The high level of operational safety is also ensured in
complex global networks. QUINT POWER also
operates in applications where static voltage dips,
transient power supply failures or phase failure are
common.
Large capacitors ensure mains buffering of more
than 20 ms at full load. All 3-phase QUINT POWER
units provide the complete output power even in the
event of a continuous phase failure.
Reliable startup of heavy loads is ensured by a
power reserve of up to 50% - the POWER BOOST.
Preventive function monitoring diagnoses an
impermissible operating state and minimizes
downtimes in your system. An active transistor output
and an electrically isolated relay contact are provided
for remote monitoring of this state.
This signal not only provides information on the
device function, but also indicates a system overload at
an early stage.
1-Phase Power Supply, Primary Switch Mode
for Use in Potentially Explosive Areas
QUINT-PS-100-240AC/24DC/5/EX
Headquarters: © Phoenix Contact GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany
Phone +49 - 52 35 - 30 0 • Fax +49 - 52 35 - 34 12 00 • www.phoenixcontact.com
Local Contact: www.phoenixcontact.com/salesnetwork
2. Area of Application
The power supply corresponds to the EN 50021
standard and may be installed within a potentially
explosive area, in which Category 3 equipment is
required.
The power supply is suitable for use in Class I,
Division 2, Groups A, B, C, and D.
QUINT POWER can be used globally due to the
consistent provision of a wide range input.
In this way, your entire system can be tested at any
production location in the world and can be delivered to
any location in the world without faulty switching of the
input voltage. This reduces storage costs and logistical
effort.
An international approval package including
CB Scheme, UL 60950 for IT equipment, and UL 508
for industrial control equipment enables the device to
be used globally.
Safe operation in adverse conditions is emphasized
by the approval of the entire product range by
Germanischer Lloyd.