6.42
IDT70V9179L
High-Speed 32K x 9 Dual-Port Synchronous Pipelined Static RAM Industrial and Commercial Temperature Ranges
17
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
CORPORATE HEADQUARTERS for SALES: for Tech Support:
6024 Silver Creek Valley Road 800-345-7015 or 408-284-8200 408-284-2794
San Jose, CA 95138 fax: 408-284-2775 DualPortHelp@idt.com
www.idt.com
Datasheet Document History
9/30/99: Initial Public Release
11/12/99: Replaced IDT logo
1/10/01: Page 3 Changed information in Truth Table II
Page 4 Increased storage temperature parameters
Clarified TA parameter
Page 5 DC Electrical parameters–changed wording from "open" to "disabled"
Changed ±200mV to 0mV in notes
Removed Preliminary status
01/15/04: Consolidated multiple devices into one datasheet
Changed naming conventions from VCC to VDD and from GND to Vss
Removed I-temp footnote
Page 2 Added date revision to pin configuration
Page 4 Added Junction Temperature to Absolute Maximum Ratings Table
Added Ambient Temperature footnote
Page 5 Added I-temp numbers for 9ns speed to the DC Electrical Characteristics Table
Added 6ns speed DC power numbers to the DC Electrical Characteristics Table
Page 7 Added I-temp for 9ns speed to AC Electrical CharacteristicsTable
Added 6ns speed AC timing numbers to the AC Electrical Characteristics Table
Page 15 Added 6ns speed grade and 9ns I-temp to ordering information
Added IDT Clock Solution Table
01/29/09: Page 16 Removed "IDT" from orderable part number
01/27/14: Page 1 Added green availability to Features
Page 1 Removed 6.5ns commercial speed, downgraded the clock from 6.5ns to 7.5ns, the cycle time from
10ns to 12.5ns and downgraded the operation from 100MHz to 83MHz data access in Pipelined output
mode in the Features
Page 1 Changed the maximum number of addresses for both the L and R from A15 to A14 in the Functional
Block Diagram
Page 2 Changed the A15L & A15R to NC in the 70V9179PF PN100 Pin Configuration and updated footnotes
Page 3 Updated Left Port A15L to A14L & Right Port A15R to A14R in the Pin Names Table and updated the
footnotes
Page 6 Corrected a typo
Pages 5 & 7 Removed the 6ns speed grade Commercial Only from the DC Electrical and the AC Electrical Tables
Page 9 Corrected a typo
Page 15 Changed the maximum number of addresses for A15 to A14 in the Depth and Width Expansion Diagram
Page 16 Added Green and T&R indicators to and removed 6ns speed grade Commercial Only from Ordering
Information
