THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE
REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE:
6 - 30mm
0.5 - 6mm
30 - 120mm
ANGLES
<0.5mm
2.69 REF.18.00 7.60 10.67
REF39.5
19.00MM HEX WRENCH
3.00 REF25.00
21.23
21.88 0.40
9.26 0.40
7.50 0.40
C0.5
A RELEASE TO MFG. 07-Jun-17 4004 BMG
A
B
REFERENCE
EAR # 7407
CONFIGURATION LEVEL: In Work
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 2 OF 2
SCALE: 2.3:1.007-Jun-17K. CAPOZZI
TITLE
N STR PLUG FOR
LMR-400 CABLE
DATEAPPROVED
Amphenol RF
www.amphenolrf.com
DATE
30-Jan-17
ENGINEER
B. GREENBAUM
MATERIAL
SEE NOTES
DATE
30-Jan-17
DRAWN
B. GREENBAUM
FINISH
DRAWING NO. 82-6642
ITEM NO. 82-6642
PART NO. 82-6642
NOTES:
1. MATERIALS AND FINISHES:
BODY - BRASS, WHITE BRONZE PLATING
CONTACT - BRASS, GOLD PLATING
INSULATORS - PTFE, NATURAL
COUPLING NUT - BRASS, WHITE BRONZE PLATING
GASKET - SILICON RUBBER, RED
FERRULE - COPPER, WHITE BRONZE PLATING
HEAT SHRINK TUBING - CROSSLINKED POLYOLEFIN
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
B. FREQUENCY RANGE: DC - 6 GHz
C. DIELECTRIC WITHSTANDING VOLTAGE: 1000 VRMS, MIN.
3. MECHANICAL:
A. DURABILITY: 500 CYCLES MIN.
B. TEMPERATURE RANGE: -65$ C TO +165$ C
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL RF, 82-6642 , AND DATE CODE"
5. RECOMMENDED CABLE ASSEMBLY INSTRUCTIONS:
A. TRIM CABLE AS SHOWN.
B. SLIDE HEAT SHRINK TUBING, FERRULE AND INSULATOR DISC ONTO CABLE.
C. SOLDER CABLE CENTER CONDUCTOR TO CONTACT.
D. INSERT CABLE WITH FOIL ENTERING CONNECTOR AND BRAID OVER KNURL.
E. CRIMP FERRULE OVER BRAID WITH 0.429" HEX DIE.
F. APPLY HEAT SHRINK TUBING OVER FERRULE.
. SHOW CABLE ENTRY DIMENSIONS.
6
INSULATOR DISC FERRULECONTACT HEAT SHRINK TUBE
SCALE 1.000
MIN PASS THRU DIAMETER
RECOMMENDED CABLE
STRIPPING DIMENSIONS
CUSTOMER OUTLINE DRAWING
ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY
6
6
6
6
