POE36D – 1AT Characteristics
WWW.PHIHONG.COM
INPUT:
DC Input Voltage Range
36 to 72VDC
DC Input Current
1.2A (DC) maximum for 36VDC
OUTPUT:
Total Output Power
33.6W at 56VDC
DC Offset
No data degradation with DC imbalance 18mA
Efficiency
80% (typical) at maximum load
Ripple and Regulation
100mV maximum
Transient O/P Voltage Protection
60V maximum at switch on and off
ENVIRONMENTAL:
Temperature
Operation -20 to +50°C
Non-operation -25 to +85°C
Humidity
Operation 5 to 90%
EMC
FCC Part 15 Class B
EN55022 Class B
Isolation Test
Primary to Secondary: 2121VDC for 1 minute, 10mA
Primary to Field Ground: 2121VDC for 1 minute, 10mA
Output to Field Ground: 2121VDC for 1 minute, 10mA
Immunity
ESD: EN61000-4-2. Level 3
RS: EN61000-4-3. Level 3
EFT: EN61000-4-4. Level 2
Surge: EN61000-4-5. Level 3
CS: EN61000-4-6. Level 3
Insulation Resistance
Primary to Secondary: >10M OHM 500VDC
Primary to Field Ground: >10M OHM 500VDC
FEATURE:
Cisco
No extern parts required for Legacy devices:
VoIP Phones:
7910, 7912, 7940, 7960
Access Points:
1040, 1140, 1250, 1260, 3500
Over Voltage/Current, Short Circuit Protection
Outputs equipped with short circuit protection and
overload protection as per 802.3at specification
The output can be shorted permanently without damage
Indicators
Green LED 1: Input power “ON”
Green LED 2: Valid IEEE8-2.3at load detected and
connected “PoE PLUS”
Green LED 3: Valid IEEE802.3af load detected and
connected
Input Connector
– Anytek OQ0355510000G
Mate – Anytek TJ0350520000G or TJ035152000G
Anytek is part of Giga-Way Technology Corp
Output Connection
+pins 3, 6
-pins 1 ,2
Warranty
1 Year
Dimension Diagram Unit: mm (inch)
