https://www.phoenixcontact.com/us/products/2903370
3/7/14Page2/5
Relay Module-RIF-0-RPT-24DC/21-2903370
Technical data
Contact side
Contact type 1 PDT
Contact material AgSnO
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Min. switching current 10 mA (at 12 V)
Limiting continuous current 6 A
Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947 1 A (24 V (DC13))
3 A (230 V (AC 15))
Connection data
Connection method Push-in connection
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section stranded min. 0.14 mm²
Conductor cross section stranded max. 1.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 16
Stripping length 8 mm
General
Test voltage relay winding/relay contact
4 kV
rms
(50 Hz, 1 min.)
Operating mode 100% operating factor
Degree of protection IP20 (Relay socket)
RT III (Relay)
Mechanical service life
Approx. 2 x 10
7
cycles
Standards/regulations DIN EN 50178
IEC 62103
Rated insulation voltage 250 V AC