7 www.fairchildsemi.com
MM74HC4051 • MM74HC4052 • MM74HC4053
AC Test Circuits and Switching Time Waveforms (Continued)
FIGURE 7. Crosstalk: Control Input to Signal Output
FIGURE 8. Crosstalk Between Any Two Switches
Typical Performance Characteristics
Typical “On” Resistance vs Input Voltage
V
CC
=−V
EE
Special Considerations
In certain applications the external load-resistor current
may include both V
CC
and signal line components. To
avoid drawing V
CC
current when switch current flows into
the analog switch pins, the voltage drop across the switch
must not exceed 1.2V (calculated from the ON resistance).