GBJ3510
Document number: DS37131 Rev. 3 - 2
October 2016
© Diodes Incorporated
35A GLASS PASSIVATED BRIDGE RECTIFIER
Features
Glass Passivated Die Construction
High Case Dielectric Strength of 2500V
RMS
Low Reverse Leakage Current
Surge Overload Rating to 400A Peak
Ideal for Printed Circuit Board Applications
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Mechanical Data
Case: GBJ
Case Material: Molded Plastic. UL Flammability Classification
94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Lead Free Tin Plated Leads, Solderable per MIL-STD-
202, Method 208
Polarity: Molded on Body
Mounting: Through Hole for #6 Screw
Mounting Torque: 5.0 in-lbs Maximum
Marking: Part Number
Weight: 6.6 grams (Approximate)
Ordering Information (Note 3)
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Maximum Ratings (@T
A
= +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Forward Rectified Output Current With Heatsink T
C
= +80°C
(Note 4) Without Heatsink T
C
= +25°C
Non-Repetitive Peak Forward Surge Current 8.3 ms
Single Half Sine-Wave Superimposed on rated Load
I
2
t Rating for Fusing (3ms < t < 8.3ms)
(Note 4)
Mounting Torque (Recommended Torque: 0.5N.m)
Thermal Characteristics
Typical Thermal Resistance Junction to Case (Note 5)
Typical Thermal Resistance Junction to Lead (Note 5)
Operating and Storage Temperature Range
Notes: 4. Non-repetitive, for t > 1ms and < 8.3ms.
5. Thermal resistance from junction to case per element. Unit mounted on 250 x 250 x 25mm aluminum plate heat sink.