HLMP-EG55-JK0DD

Features
Well dened and smooth spatial radiation patterns
Wide viewing angle
Tinted diused lamp
High luminous output
Colors:
590/592 nm Amber
617 nm Reddish-Orange
626/630 nm Red
High operating temperature: T
JLED
= +130°C
Superior resistance to moisture
Applications
Trac management:
Variable message signs
Trac management signs
Commercial indoor/outdoor advertising:
Signs
Marquees
Passenger information
Automotive:
Exterior and interior lights
Description
These Precision Optical Perform ance AlInGaP LEDs pro-
vide superior light output for excellent readability in sun-
light and are extremely reliable. AlInGaP LED technology
provides extremely stable light output over long periods
of time. Precision Optical Performance lamps utilize the
aluminum indium gallium phosphide (AlInGaP) technol-
ogy.
These LED lamps are tinted, diused, T-1
3
/
4
packages
incorporating second generation optics producing well
dened radiation patterns at specic viewing cone an-
gles.
There are two families of amber, red, and red-orange
lamps; AlInGaP and the higher performance AlInGaP II.
The high maximum LED junction tempera ture limit of
+130°C enables high temperature operation in bright
sunlight conditions.
These lamps are available in two package options to give
the designer exibility with device mounting.
Benets
Viewing angles match trac management sign
requirements
Colors meet automotive specications
Superior performance in outdoor environments
Suitable for autoinsertion onto PC boards
HLMP-EL55/EG55/EL57/EH57/ED57
T-1
3
/
4
(5 mm) Precision Optical Performance AlInGaP
LED Lamps
Data Sheet
2
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Options
00: Bulk Packaging
DD: Ammo Pack
Color Bin Selections
0: No color bin limitation
K: Amber color bins 2 and 4 only
L: Amber Color Bins 4 and 6 only
Maximum Intensity Bin
Minimum Intensity Bin
Viewing Angle & Lead Stand Os
55: 55 deg without lead stand os; AlInGaP
57: 55 deg without lead stand os; AlInGaP II
Color
D: 630 nm Red
G: 626 nm Red
H: 617 nm Red-Orange
L: 590/592 Amber
Package
E: 5 mm Round
Device Selection Guide for AlInGaP
Part Number
Color and Dominant Wavelength
ld (nm) Typ.
[3]
Luminous Intensity Iv
(mcd) at 20 mA Min.
[1,2]
Luminous Intensity Iv
(mcd) at 20 mA Max.
[1,2]
HLMP-EL55-GK0DD Amber 590 140 400
HLMP-EL55-GHKDD Amber 590 140 240
HLMP-EL55-HJKxx Amber 590 180 310
HLMP-EL55-JKLDD Amber 590 240 400
HLMP-EL55-LP000 Amber 590 400 1150
HLMP-EG55-GK0DD Red 626 140 400
HLMP-EG55-HJ0xx Red 626 180 310
HLMP-EG55-JK0xx Red 626 240 400
Device Selection Guide for AlInGaPII
Part Number
Color and Dominant Wavelength
ld (nm) Typ.
[3]
Luminous Intensity Iv
(mcd) at 20 mA Min.
[1,2]
Luminous Intensity Iv
(mcd) at 20 mA Max.
[1,2]
HLMP-EL57-LP0xx Amber 592 400 1150
HLMP-EH57-LP000 Red-Orange 617 400 1150
HLMP-ED57-LP0xx Red 630 400 1150
HLMP-ED57-LPT00 Red 630 400 1150
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, l
d
, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
3
Package Dimensions
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. TAPERS SHOWN AT TOP OF LEADS (BOTTOM OF LAMP PACKAGE) INDICATE AN
EPOXY MENISCUS THAT MAY EXTEND ABOUT 1 mm (0.040 in.) DOWN THE LEADS.
3. RECOMMENDED PC BOARD HOLE DIAMETERS:
LAMP PACKAGE WITHOUT STAND-OFFS: FLUSH MOUNTING AT BASE OF
LAMP PACKAGE = 1.143/1.067 (0.044/0.042).
2.35 (0.093)
MAX.
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244)
MIN.
0.70 (0.028)
MAX.
1.00
(0.039)
MIN.
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)
SQ. TYP.
CATHODE
LEAD
CATHODE
FLAT
8.71 ± 0.20
(0.343 ± 0.008
1.14 ± 0.20
(0.045 ± 0.008)

HLMP-EG55-JK0DD

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - Through Hole Red, 626nm 55 Deg, 400mcd (max)
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union