1
FN7357.8
EL5106, EL5306
350MHz Fixed Gain Amplifiers with Enable
The EL5106 and EL5306 are fixed gain amplifiers with a
bandwidth of 350MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain setting resistors and can be configured
in a gain of +1, -1 or +2.
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery powered
equipment.
The EL5106 and EL5306 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE
pin to float or applying a low
logic level will enable the amplifier.
The EL5106 is offered in the 6 Ld SOT-23 and the
industry-standard 8 Ld SOIC packages and the EL5306 is
available in the 16 Ld SOIC and 16 Ld QSOP packages. All
operate over the industrial temperature range of -40°C to
+85°C.
Features
• Pb-free available (RoHS compliant)
• Gain selectable (+1, -1, +2)
• 350MHz -3dB BW (A
V
= 2)
• 1.5mA supply current per amplifier
• Fast enable/disable
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
• 450MHz, 3.5mA product available (EL5108 and EL5308)
Applications
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
Ordering Information
PART NUMBER
(Note 4)
PART
MARKING
PACKAGE
(RoHS Compliant)
PKG.
DWG. #
EL5106IWZ-T7 (Notes 1, 2) BAFA (Note 3) 6 Ld SOT-23 P6.064A
EL5106IWZ-T7A (Notes 1, 2) BAFA (Note 3) 6 Ld SOT-23 P6.064A
EL5106ISZ-T13 (Notes 1, 2)
(No longer available or supported)
5106ISZ 8 Ld SOIC (150 mil) M8.15E
EL5306ISZ (Note 2)
(No longer available, recommended replacement: EL5306IUZ)
EL5306ISZ 16 Ld SOIC (150 mil) MDP0027
EL5306ISZ-T7 (Notes 1, 2)
(No longer available, recommended replacement: EL5306IUZ-T7)
EL5306ISZ 16 Ld SOIC (150 mil) MDP0027
EL5306ISZ-T13 (Notes 1, 2)
(No longer available, recommended replacement: EL5306IUZ-13)
EL5306ISZ 16 Ld SOIC (150 mil) MDP0027
EL5306IUZ (Note 2) 5306IUZ 16 Ld QSOP (150 mil) MDP0040
EL5306IUZ-T7 (Notes 1, 2) 5306IUZ 16 Ld QSOP (150 mil) MDP0040
EL5306IUZ-T13 (Notes 1, 2) 5306IUZ 16 Ld QSOP (150 mil) MDP0040
NOTES:
1. Please refer to TB347
for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
3. The part marking is located on the bottom of the part.
4. For Moisture Sensitivity Level (MSL), please see device information page for EL5106
, EL5306. For more information on MSL please see tech
brief TB363
.
Data Sheet September 10, 2015
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC. 2002-2005, 2007, 2010, 2012, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.