FCBN425QB1Cxx Product Specification
Finisar Corporation January 2016 B3 Page 3
+3.3 V Power supply transmitter
Transmitter Non-Inverted Data Input
Transmitter Inverted Data Input
Transmitter Non-Inverted Data Input
Transmitter Inverted Data Input
Notes
1. Circuit ground is internally isolated from chassis ground.
II. General Product Characteristics
Maximum Aggregate Data Rate
112.02 Max. Aggregate Data Rate with
BER 10
-6
(per 32G Fibre Channel)
Maximum Data Rate per Lane
28.05 Max. Data Rate per Lane with
BER 10
-6
(per 32G Fibre Channel)
1, 3, 5, 10, 15, 20, 30, 50,
100
Other lengths may be available upon
request
Typical applications include
InfiniBand QDR/FDR/EDR,
10/25/40G/100G Ethernet,
4/8/16/32G Fibre Channel,
SAS3
Electrical Interface and Pin-out
Pin-out as defined by SFF-8679
Standard Optical Cable Type
Multimode round fiber
cable, plenum-rated
OFNP. Low Smoke Zero Halogen
(LSZH), round fiber cable also available
Maximum Power Consumption per
End
3.5 (retimed Tx)
2.5 (unretimed)
Varies with output voltage swing and
pre-emphasis settings
Serial, I2C-based, 450 kHz
maximum frequency
Notes:
1. Supports InfiniBand QDR/FDR/EDR, 10/25/40/100 Gigabit Ethernet and 8/16/32G Fibre Channel
applications but at 28.05 Gb/sec BER is limited to 10
-6
.
2. Tested with a PRBS 2
31
-1 test pattern.
