OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HLMA-PL00-QRR11

P1-P3P4-P6P7-P9
Features
Subminiature at top package
Ideal for backlighting and light piping applications
Subminiature dome package
Nondi used dome for high brightness
Wide range of drive currents
Colors: 590 nm Amber, 605 nm Orange, 615 nm Red-
dish-Orange, 622/626 nm Red, and 635 nm Red
Ideal for space limited applications
Axial leads
Available with lead con gurations for surface mount
and through hole PC board mounting
Technology
These subminiature solid state lamps utilize one of the
two newly devel oped aluminum indium gallium phos-
phide (AlInGaP) LED technologies. The HLMT-Devices
are especially e ective in very bright ambient lighting
condi tions. The colors 590 nm amber, 605 nm orange,
615 nm reddish-orange, 622/626 nm red, and 635 nm red
are available with viewing angles of 15° for the domed
devices and 125° for the  at top devices.
Description
Flat Top Package
The HLMX-PXXX  at top lamps use an untinted, nondif-
fused, truncated lens to provide a wide radiation pattern
that is neces sary for use in backlighting applica tions. The
at top lamps are also ideal for use as emitters in light
pipe applications.
Dome Packages
The HLMX-QXXX dome lamps use an untinted, nondif-
fused lens to provide a high luminous inten sity within a
narrow radiation pattern.
Lead Con gurations
All of these devices are made by encapsulating LED chips
on axial lead frames to form molded epoxy submini-
ature lamp packages. A variety of package con guration
options is available. These include special surface mount
lead con gura tions, gull wing, yoke lead, or Z-bend. Right
angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm
(0.200 inch) center spacing are available for through hole
mounting. For more infor mation refer to Standard SMT
and Through Hole Lead Bend Options for Subminiature
LED Lamps data sheet.
SunPower Series
HLMA-PF00, HLMA-PG00, HLMA-PH00, HLMA-PL00, HLMA-QF00, HLMA-QG00, HLMA-QH00,
HLMA-QL00, HLMT-PG00, HLMT-PH00, HLMT-PL00, HLMT-QG00, HLMT-QH00, HLMT-QL00
HLMA-Qx00, HLMA-Px00 HLMT-Px00 and HLMT-Qx00
Subminiature High Performance AlInGaP LED Lamps
Data Sheet
2
Device Selection Guide
d
Typ. I
V
Package Viewing Package
Part Number (nm) (mcd) Description Angle 2
1
/
2
Outline
HLMA-QL00 590 500 Domed, 15° B
HLMT-QL00 590 1000 Nondi used,
HLMA-QJ00 605 500 Untinted
HLMA-QH00 615 500
HLMT-QH00 615 800
HLMA-QG00 626 500
HLMT-QG00 622 1000
HLMA-QF00 635 500
HLMA-PL00 590 75 Flat Top, 125° A
HLMT-PL00 590 150 Nondi used,
HLMA-PJ00 605 75 Untinted
HLMA-PH00 615 75
HLMT-PH00 615 120
HLMA-PG00 626 75
HLMT-PG00 622 150
HLMA-PF00 635 75
Absolute Maximum Ratings at T
A
= 25°C
Parameter HLMA-xxxx HLMT-xxxx Unit
Peak Forward Current
[2]
100 100 mA
Average Forward Current (I
PEAK
= 100 mA)
[1,2]
30 30 mA
DC Forward Current
[3,5,6]
50 50 mA
Power Dissipation 120 130 mW
Reverse Voltage (I
R
= 100 μA) 5 V
Transient Forward Current (10 μs Pulse)
[5]
500 mA
Operating Temperature Range –40 to +100 °C
Storage Temperature Range –55 to +100 °C
LED Junction Temperature 110 °C
Lead Soldering Temperature [1.6 mm (0.063 in.) from body] 260°C for 5 seconds
SMT Re ow Soldering Temperature 260°C for 20 seconds
Notes:
1. Maximum I
AVG
at f = 1 kHz.
2. Refer to Figure 5 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 4.
4. The transient peak current is the maximum non-recurring peak current these devices can withstand without damaging the LED die and wire
bonds. Operation at currents above Absolute Maximum Peak Forward Current is not recommended.
5. Drive currents between 10 mA and 30 mA are recommended for best long term performance.
6. Operation at currents below 5 mA is not recommended, please contact your Avago sales representative.
3
Part Numbering System
HLMx - x x 00 - x x x xx
Packaging Option
00: Straight Leads, Bulk Packaging, Quantity of 500 parts
11: Gull Wing Bend, Tape & Reel – 7" Reel
12: Gull Wing Bend, Bulk
14: Gull Wing Bend, Tape & Reel – 13" Reel
21: Yoke Bend, Tape and Reel – 7" Reel
22: Yoke Bend, Bulk
24: Yoke Bend, Tape and Reel – 13" Reel
31: Z-Bend, Tape and Reel – 7" Reel
32: Z-Bend, Bulk
34: Z-Bend, Tape and Reel – 13" Reel
Color Bin Selection
0: Full Color Bin Distribution
B: Color Bins 2 & 3
K: Color Bins 2, 3 & 4
R: Color Bins 2 & 4
W: Color Bins 2, 4, 6 & 7
X: Color Bins 4, 6 & 7
Maximum Iv Bin Options
Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Color Options
L: Amber 590 nm
J: Orange 605 nm
H: Reddish Orange 615 nm
G: Red 622/626 nm
F: Red 635 nm
Package Options
Q: Dome
P: Flat Top
P1-P3P4-P6P7-P9

HLMA-PL00-QRR11

Mfr. #:
Buy HLMA-PL00-QRR11
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - SMD Poly Ftop Yellow
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet