DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
DRAWING
NUMBER
13760
DATE:
October
2011
STATSHIELD
®
HIGH PUNCTURE, MOISTURE BARRIER BAG, .0065" (.1651mm)
© 2011 DESCO INDUSTRIES INC.
Employee Owned
STATSHIELD
®
HIGH PUNCTURE MOISTURE BARRIER BAG
Specifications:
Electrical Properties Typical Values Test Procedures/Method
Surface Resistivity
(both surfaces @ 12%RH) <10E12 ohms ANSI/ESD STM11.11
Static Shielding <10 nJ ANSI/ESD STM11.31
Static Shielding 20 volts EIA 541
Charge Generation
Teflon -0.09 (nC/in
2)
Modified incline plane
Quartz +.10 (nC/in
2)
Modified incline plane
Physical Properties
Thickness Nominal .0065” (.1651mm) ±10% MIL-STD-3010, 1003
Puncture Strength >30 lbs MIL-STD-3010, 2065
Heat Seal Strength
(Vetrod bar sealer) >11 (lb/in width) ASTM D1876-93
Heat Seal 325 (60 PSI @ 3 sec dwell) (°F)
MVTR ≤0.005/100sq.in/24hours ASTM S 1249-90
Contact Corrosion No evidence of corrosion, FTMS 101C, Method 3005
pitting, or etching of material
Non-corrosive Pass MIL-STD-3010, M3005
Chemical Properties
Polycarbonate compatible: Contains no Amines, Amides, or N-Octanoic Acid.
Bag is free of amines, N-octanoic acid, silicones and heavy metals.
NOTE: The complete dry package concept of packaging for electronics
requires three elements:
MOISTURE BARRIER BAG - To Protect
DESICCANT - To Absorb Moisture
INDICATOR - To Monitor Performance
For detailed instructions see Technical Bulletin TB-2031 “Application
Instructions for Moisture Barrier Bags.”
DESICCANT PACK INFORMATION
Desiccant packs meet MIL-D-3464. Packs meet Type I and Type II
criteria for dust-free packaging. RULE-OF-THUMB - use 1/2 unit for
every 45 square inches of bag area.
13840 1/2 unit Box of 700
13843 1 unit Box of 450
13844 1 unit Pail of 300
13850 1/2 unit Pail of 550
HUMIDITY MONITOR INFORMATION
13860 Humidity Monitor. Can of 100 2" x 3" blotting paper cards that
indicate 10, 20, 30 and 40% relative humidity with a color comparison
bar. Meets MIL-I-8835.
Heavy Duty Static
Dissipative Polyester
Aluminum Shielding
Layer
Polyester Layer
Aluminum Shielding Layer
High Performance Heavy
Duty Static Dissipative Polyethylene
Specications and procedures subject to change without notice.
STATSHIELD
®
EMI/RFI STATIC SHIELD
MOISTURE BARRIER BAG
MADE IN U.S.A.
DESCO INDUSTRIES INC.
CHINO, CA CANTON, MA MARLBORO, MA
Side Weld Seal 3/8 in.
Date & Lot Code
Printed for QC
Traceablility
Statshield
®
bags are packaged 100 per package in an oversized shielding bag.
Shelf life of bags is minimum one year in normal indoor storage conditions.
The bag’s material meets the required limits of ANSI/ESD S541 per ANSI/ESD S20.20.
Statshield
®
and Statfree
®
are Registered Trademarks of Desco Industries Inc.
RoHS and REACH Compliance Statement
None of the RoHS restricted materials or REACH substances of very high concern are intentionally
added in manufacturing this product. Ref: Directive 2002/95/EC Article 4.1. and Regulation (EC) No.
1907/2006. See Desco Industries Inc. Limited Warranty at Desco.com.
ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
Made in the
United States of America
