NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
SHEET 1 OF 1
LDCFDLT_A
SCALE: 2:1
TITLE:
SIZE
DWG. NO.
REV
DO NOT SCALE DRAWING
ANGLES:
1
TOLERANCES:
.020 [0.50]-.200 [5.00]=
.008 [0.20]
.200 [5.00]-1.200 [30.00]=
.016 [0.40]
1.20 [30.0]-4.75 [120.0]=
.024 [0.60]
4.75 [120.0]-12.40 [315.0]=
.040 [1.0]
DRAWN:
ENGR:
DT:
DT:
MATERIAL:
FINISH:
PROJECTION:
:
THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
REVISIONS
REV
DESCRIPTION
DATE
APPV
B
Updated footprint and dimensions; Added new title block 2-JUL-12 SAH
RP-SMA FEMALE CABLE END CRIMP
FOR RG-174 CABLE
CONREVSMA011
B
2-JUL-12
B.MURPHY
0.374
[9.50]
Ø0.154
[3.90]
CRIMP RING
Ø0.197
[5.00]
0.787
[20.00]
HEAT SHRINK
1/4-36UNS-2A
THREADS
S.HOGAN
2-JUL-12
Descripon Material Finish
Body
Pin
Insulaon
Nickel
N/A
Gold
PTFE
Gasket RubberSI Rubber
Crimp Ring
Heat Shrink Polyolefin Black
NickelBrass
Brass
Brass
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.197
[5.00]
0.571
[14.50]
0.252
[6.40]
0.106
[2.70]
H0.252
[6.40]
SIDE VIEW
Ø0.209
[5.30]
0.339
[8.60]
Ø0.049
[1.25]
PIN
3. Solder the pin to the center conductor.
4. Insert the pin, center conductor, and insulator into the body.
5. Wrap the braid around the tail of the body and crimp the ring with a
0.128" hex crimp tool (or one labeled for use with RG-174 cable).
6. Use heat shrink to cover crimp.
CONREVSMA011 ASSEMBLY INSTRUCTIONS
2. Slip heat shrink and crimp ring onto stripped cable.
1. Strip cable to recommended dimensions.
0.177
[4.50]
0.033
[0.85]
0.098
[2.50]
RG-174 Cable
