SPEC NO: DSAF1085 REV NO: V.8A DATE: FEB/04/2015 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: P.Cheng ERP: 1203012853
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APD3224SECK-F01 Super Bright Orange (AlGaInP) Water Clear
1500 2700
*1000 *1600
20
°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Orange 610 nm I
F=20mA
λD [1] Dominant Wavelength Super Bright Orange 601 nm I
F=20mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 29 nm I
F=20mA
C Capacitance Super Bright Orange 15 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA
I
R Reverse Current Super Bright Orange 10 uA VR=5V
Parameter Super Bright Orange Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 195 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
