ISL6131, ISL6132
14
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN9119.6
February 11, 2014
For additional products, see www.intersil.com/en/products.html
About Intersil
Intersil Corporation is a leader in the design and manufacture of high-performance analog, mixed-signal and power management
semiconductors. The company's products address some of the largest markets within the industrial and infrastructure, personal
computing and high-end consumer markets. For more information about Intersil, visit our website at www.intersil.com
.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com
. You may report errors or suggestions for improving this datasheet by visiting
www.intersil.com/en/support/ask-an-expert.html
. Reliability reports are also available from our website at
http://www.intersil.com/en/support/qualandreliability.html#reliability
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest revision.
DATE REVISION CHANGE
February 11, 2014 FN9119.6 • On page 5 - right hand column, paragraph 5 that starts with: "For the ISL6131, two dividers of two resistors
each can be employed to monitor the OV and UV levels for each voltage. Otherwise, use a single three-resistor
string for each voltage." Changed ISL6131 to ISL6132.
• On page 14 - Updated Products section to updated About Intersil verbiage
July 18, 2011 FN9119.5 • On page 2, Ordering Information: added ISL6131EVAL1Z and ISL6132EVAL1Z Evaluation Boards.
• On page 7: changed "Using the ISL613XSUPEREVAL2 Platform" section to "Using the ISL6131EVAL1Z and
ISL6132EVAL1Z Platforms" and rewrote text.
• On page 12: replaced Fig. 25, “ISL613XSUPEREVAL2 PHOTOGRAPH” with “ISL6131EVAL1Z SCHEMATIC AND
PHOTOGRAPH.“
• On page 13: replaced Fig. 26, “ISL613XSUPEREVAL2 CHANNEL 1 SCHEMATIC” with “ISL6132EVAL1Z
SCHEMATIC AND PHOTOGRAPH.”
• Converted to latest datasheet template.
August 17, 2010 FN9119.4 • P1: Removed prenotification part ISL6132IR & Obsolete part ISL6131IR from Order Info. Added Part Marking
column to Order Info. Updated Pb-free bullet in Features and Pb-free note in Ordering Information based on lead
finish. Added TB347 link to ordering information for reel specifications.
• P3: Per customer request, added "PD" label to Pinout and description to Pin Descriptions table, which states
"Thermal Pad. Should be electrically connected to GND".
• P4: Updated Caution statement in Abs Max. Removed Max Lead Soldering Temp from Thermal Info and
replaced with Pb-Free Reflow link. Added standard temp range note to spec table MIN MAX columns.
• P13: Updated POD to latest released. Changes were to convert to new QFN format and correct Note 4
(corrected “0.015mm and 0.30mm” to “0.15mm and 0.30mm”).
July 22, 2005 FN9119.3 • Added additional application usage text to clarify component choice. Corrected typographical errors in spec
table.
August 18, 2004 FN9119.2 • Added Pb-free parts.
March 5, 2004 FN9119.1 • Added application information.
July 15, 2003 FN9119.0 Initial Release