0.059
1.50
0.063
1.60
0.087
2.20
0.100
2.54
0.197±0.002
5.00±0.05
0.126±0.002
3.20±0.05
#1
#2
#3#4
0.030±0.002
0.75±0.05
0.043
1.10
0.045
1.15
0.031
0.80
0.094
2.39
#1
#3#4
#2
Recommended Land Pattern
5.0 x 3.2mm Package (Option “FL”)
Notes: 4. In OE or ST mode, a pull-up resistor of 10kΩ or less between OE/ST pin and Vdd is
recommended if pin 1 is not externally driven. If pin 1 needs to be left floating,
use the NC opition.
5. A capacitor value of 0.1μF or higher between Vdd and GND is required.
Pin
Name
Functionality
1
OE/ST
Output Enable
H or Open (4): specified frequency output
L: output is high impedance. Only output
driver is disabled
Standby
H or Open (4): specified frequency output
L: output is low (weak pull down). Device
goes to sleep mode. Supply current
reduces to Istd.
No Connect
Any voltage between 0 and Vdd or open
(4): specified frequency. pin 1 has no
function
2
GND
Power
Electrical ground (5)
3
Out
Output
Oscillator clock output
4
Vdd
Power
Power supply voltage (5)
-
ASTMHT
A3
SHEET 4 OF 5
SCALE:20:1
DWG NO.
TITLE:
REVISION
DO NOT SCALE DRAWING
Apracon LLC. 2 Faraday, Suite#B Irvine, Ca. 92618
TOP PACKAGE MARKING IS
FOR ILLUSTRATION PURPOSES ONLY
