0.035
0.90
0.031
0.80
0.047
1.20
0.059
1.50
0.079±0.002
2.00±0.05
0.063±0.002
1.60±0.05
#1 #2
#3#4
0.030±0.002
0.75±0.05
0.037
0.93
0.027
0.68
0.019
0.48
0.048
1.23
#1
#3#4
#2
Recommended Land Pattern
2.0 x 1.6mm Package (Option “A”)
Notes: 4. In OE or ST mode, a pull-up resistor of 10kΩ or less between OE/ST pin and Vdd is
recommended if pin 1 is not externally driven. If pin 1 needs to be left floating,
use the NC opition.
5. A capacitor value of 0.1μF or higher between Vdd and GND is required.
Pin
Name
Functionality
1
OE/ST
Output Enable
H or Open (4): specified frequency output
L: output is high impedance. Only output
driver is disabled
Standby
H or Open (4): specified frequency output
L: output is low (weak pull down). Device
goes to sleep mode. Supply current
reduces to Istd.
No Connect
Any voltage between 0 and Vdd or open
(4): specified frequency. pin 1 has no
function
2
GND
Power
Electrical ground (5)
3
Out
Output
Oscillator clock output
4
Vdd
Power
Power supply voltage (5)
-
ASTMHT
A3
SHEET 1 OF 5
SCALE:30:1
DWG NO.
TITLE:
REVISION
DO NOT SCALE DRAWING
Apracon LLC. 2 Faraday, Suite#B Irvine, Ca. 92618
TOP PACKAGE MARKING IS
FOR ILLUSTRATION PURPOSES ONLY
