https://www.phoenixcontact.com/pi/products/2834766
08/21/2018Page2/5
Relay Module-PR2-RSP3-LDP-24DC/4X21AU-2834766
Technical data
Coil side
Nominal input voltage U
N
24 V DC
Typical input current at U
N
38 mA
Typical response time 13 ms
Typical release time 5 ms
Protective circuit Damping diode
Operating voltage display Green LED
Power dissipation for nominal condition 0.91 W
Contact side
Contact type 4 PDTs
Type of switch contact Single contact
Contact material AgNi, hard gold-plated
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 1 V
Min. switching current 1 mA
Maximum inrush current 12 A (15 ms)
Limiting continuous current 5 A
Interrupting rating (ohmic load) max. 120 W (at 24 V DC)
110 W (at 48 V DC)
78 W (at 60 V DC)
55 W (at 110 V DC)
77 W (at 220 V DC)
1250 VA (for 250 V AC)
General
Test voltage relay winding/relay contact 2 kV (50 Hz, 1 min.)
Test voltage relay contact/relay contact 2 kV (50 Hz, 1 min.)
Operating mode 100% operating factor
Mechanical service life
5x 10
7
cycles
Mounting position any
Assembly instructions In rows with zero spacing
Connection data input side
Connection name Coil side
Connection method Spring-cage connection
Stripping length 10 mm
Conductor cross section solid 0.2 mm² ... 1.5 mm²
Conductor cross section flexible 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Standards and Regulations
Standards/regulations IEC60664
EN 50178
