OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleVLED@optekinc.com www.optekinc.com
Issue A 04/06
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Amber PLCC4 Surface Mount LED
OVSAABC2R8
Storage Temperature Range -40 ~ +100° C
Operating Temperature Range -40 ~ +100° C
Junction Temperature 110° C
Reverse Voltage 5 V
Continuous Forward Current 70 mA
Peak Forward Current (10% Duty Cycle, PW VHF 200 mA
Power Dissipation 225 mW
Junction/Ambient
1
300° C/W
Junction/Solder Point 150° C/W
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Electrical Characteristics
T
A
= 25
o
C unless otherwise noted
SYMBOL
PARAMETER MIN TYP MAX UNITS CONDITIONS
I
V
Luminous Intensity 450 700 ---- mcd I
F
= 50 mA
V
F
Forward Voltage ---- 2.6 3.2 V I
F
= 50 mA
I
R
Reverse Current ---- ---- 10 µA V
R
= 5 V
D
Dominant Wavelength 584 591 596 nm I
F
= 50 mA
2 ½ 50% Power Angle ---- 120 ---- deg I
F
= 50 mA
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
Standard Bins (I
F
= 50 mA)
Lamps are sorted to luminous intensity (I
V
) and dominant wavelength (
D
) bins shown.
Orders for OVSAABC2R8 may be filled with any or all bins contained as below.
Note:
1. Rth test condition: Mounted on PC board FR 4 (pad size
2
)
Dominant Wavelength (nm)
584 596 590 587 593
1120
900
V2
710
V1
560
U2
450
U1
X2 X4 X3 X5
Luminous Intensity
(mcd)
Luminous intensity is at
U1 bin or above.
