DATA SHEET • SMS7621-092: SCHOTTKY DIODE ANTI-PARALLEL PAIR
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 August 18, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201742C
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMS7621-092 are provided
in Table 1. Electrical specifications are provided in Table 2.
A graph of forward voltage versus forward bias current is shown
in Figure 2.
Table 1. SMS7621-092 Absolute Maximum Ratings (Per Junction)
1
Parameter Symbol Minimum Maximum Units
Forward current IF 50 mA
Dissipated power @ 25 °C PD 75 mW
Storage temperature TSTG –65 +200 C
Operating temperature TA –65 +150 C
Electrostatic discharge:
Human Body Model (HBM), Class 0
ESD
<250 V
1
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set
at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 2. SMS7621-092 Electrical Specifications
1
(TS = +25 C Per Junction, Unless Otherwise Noted)
Parameter Symbol Test Condition Min Typical Max Units
Breakdown voltage
2
VB I
R
= 10 μA 2 V
Total capacitance CT V
R
= 0 V, f = 1 MHz 0.3 pF
Forward voltage VF IF = 1 mA 260 290 320 mV
Total resistance RT IF = 5 mA 15 18 Ω
1
Performance is guaranteed only under the conditions listed in this table.
2
It is not possible to nondestructively measure the reverse breakdown voltage of a diode in an anti-parallel pair configuration. This parameter guaranteed by design only.
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0246810
Forward Bias Current (mA)
Forward Voltage (V)
201742-002
Figure 2. Forward Voltage vs Forward Current
(TS = 25 °C)
