3
CX-One Ver.4
Support Software
The following tables lists the Support Software that can be installed from CX-One
Support Software in CX-One Outline
CX-Programmer
Application software to create and debug programs for CS/CJ/CP/NSJ-series, C-series, and CVM1/CV-series CPU
Units. Data can be created and monitored for high-speed-type Position Control Units.
CX-Integrator
Application software to build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay, and
Ethernet networks. The Routing Table Component and Data Link Component can be started from here. DeviceNet
Configuration functionality is also included.
Switch Box Utility
Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values
within the PLC you specify.
CX-Protocol
Application software to create protocols (communications sequences) between CS/CJ/CP/NSJ-series or C200HX/HG/
HE Serial Communications Boards/Units and general-purpose external devices.
CX-Simulator
Application software to simulate CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs
without a CPU Unit.
CX-Position Application software to create and monitor data for CS/CJ-series Position Control Units (except for High-speed type).
CX-Motion-NCF
Application software to monitor and set parameters for CS/CJ-series Position Control Units and Servo Drivers that
support MECHATROLINK-II communications.
CX-Motion-MCH Application software to create data for CS/CJ-series MCH Units, create motion programs, and perform monitoring.
CX-Motion
Application software to create data for CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and
to create and monitor motion control programs.
CX-Drive Application software to set and control data for Inverters and Servos.
CX-Process Tool
Application software to create and debug function block programs for CS/CJ-series Loop Controllers (Loop Control
Units/Boards, Process Control CPU Units, and Loop Control CPU Units).
Faceplate Auto-Builder for NS
Application software that automatically outputs screen data as project files for NS-series PTs from tag information in
function block programs created with the CX-Process Tool.
CX-Designer Application software to create screen data for NS-series PTs.
NV-Designer Application software to create screen data for NV-series small PTs.
CX-ConfiguratorFDT Application software for setting various units by installing its DTM module.
CX-Thermo Application software to set and control parameters in components such as Temperature Control Units.
CX-FLnet Application software for system setting and monitoring of CS/CJ-series Fl-net Units.
Network Configurator Application software to setup and monitor tag data Link for CJ2 (Built-in EtherNet/IP) CPU Units and EtherNet/IP Units.
NX-IO Configurator
Application software to set up and maintain EtherNet/IP Coupler Units and NX-series I/O Units on an EtherNet/IP
Coupler Unit.
CX-Server
Middleware necessary for CX-One applications to communicate with OMRON components, such as PLCs, Display
Devices, and Temperature Control Units.
Communications Middleware Middleware necessary to communicate with CP1L CPU Unit with built-in Ethernet port.
PLC Tools
A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the
following: I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC
clock, Routing Tables, and Data Link Tables.