OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

105000-HMC413QS16G

P1-P3P4-P6P7-P9
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 55
Pin Number Function Description Interface Schematic
1, 2, 4, 5, 7, 8,
9, 10, 13, 15
GND
Ground: Backside of package has exposed metal ground slug that
must be connected to ground thru a short path. Vias under the device
are required.
3, 14 Vpd1, Vpd2
Power Control Pin. For maximum power, this pin should be connected
to 3.6V. For 5V operation, a dropping resistor is required. A higher
voltage is not recommended. For lower idle current, this voltage can
be reduced.
6 RFIN This pin is AC coupled and matched to 50 Ohms from 1.6 to 2.2 GHz.
11, 12 RFOUT RF output and bias for the output stage.
16 Vcc
Power supply voltage for the  rst ampli er stage. An external bypass
capacitor of 330 pF is required as shown in the application schematic.
Pin Descriptions
HMC413QS16G / 413QS16GE
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 1.6 - 2.2 GHz
v04.0505
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11
11 - 56
LINEAR & POWER AMPLIFIERS - SMT
Evaluation PCB
The circuit board used in the  nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
List of Materials for Evaluation PCB 105000
[1]
* For 5V operation on Vctl line,
select R1, R2 such that 3.6V is
presented on Pins 3 and 14.
Item Description
J1 - J2 PCB Mount SMA RF Connector
J3 2 mm DC Header
C1 2.2 pF Capacitor, 0603 Pkg.
C2 10 pF Capacitor, 0402 Pkg.
C3 - C4 330 pF Capacitor, 0603 Pkg.
C5 2.2 μF Capacitor, Tantalum
L1 16 nH Inductor 0603 Pkg.
U1
HMC413QS16G / HMC413QS16GE
Ampli er
PCB
[2]
105018 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
HMC413QS16G / 413QS16GE
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 1.6 - 2.2 GHz
v04.0505
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 57
Application Circuit
* For 5V operation on Vctl line, select R1, R2 such that 3.6V is presented on Pins 3 and 14.
TL1 TL2 TL3
Impedance 50 Ohm 50 Ohm 50 Ohm
Length 0.1” 0.15” 0.1”
HMC413QS16G / 413QS16GE
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 1.6 - 2.2 GHz
v04.0505
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P9

105000-HMC413QS16G

Mfr. #:
Buy 105000-HMC413QS16G
Manufacturer:
Analog Devices Inc.
Description:
EVAL BOARD HMC413QS16G
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet