The 9 Axis TinyShield incorporates level shifters and a local power supply to ensure proper
and safe operation over the entire TinyDuino operating voltage range up to 5V.
To learn more about the TinyDuino Platform, click here
https://tinycircuits.com/pages/tinyduino-overview
TECHNICAL DETAILS
To see what other TinyShields this will work with or conflict with, check out
the TinyShield Compatibility Matrix
ST LSM9DS1 9-Axis DOF Specs
o 3 acceleration channels, 3 angular rate channels, 3 magnetic field channels
o ±2/±4/±8/±16 g linear acceleration full scale
o ±4/±8/±12/±16 gauss magnetic full scale
o ±245/±500/±2000 dps angular rate full scale
o 16-bit data output
o “Always-on” eco power mode down to 1.9 mA
o Embedded temperature sensor
o Embedded FIFO
o Position and motion detection functions
o Click/double-click recognition
TinyDuino Power Requirements
o Voltage: 3.0V - 5.5V
o Current: 4.6mA (Normal Mode). Due to the low current, this board can be run using the
TinyDuino coin cell option
Pins Used
o A5/SCL - I2C Serial Clock line
