7419 Datasheet 7419 | P1-P3

Product Description

3M™ Low Static, Non-Silicone Polyimide Film Tape 7419 with DuPont™ Kapton

polyimide ﬁlm and acrylic adhesive is

amber-colored and used for PCB solder masking and other high temperature applications.

Features and Benefits

• Specially formulated acrylic adhesive is resistant to typical solder mask temperatures for short periods of time.

Stays ﬁrmly in place during processing and removes cleanly from typical electronic substrates even after 10 min

@ 260°C (500°F).

• Non-silicone adhesive formulation lessens the potential for silicone contamination which can interfere with

subsequent bonding or conformal coating operations.

• The high temperature acrylic adhesive also has excellent chemical resistance and should be considered for

demanding chemical masking applications.

• Product is wound on a polyethylene tape core.

Technical Data August 2014

™

Low Static Polyimide Film Tape 7419

Product Construction/Material Description

3M™ Low Static Polyimide Film Tape 7419

Color Amber

Backing Dupont™ Kapton

Polyimide Film

Adhesive Acrylic

Standard Roll Length 33 m (36 yd)

Applications

• Masking or protecting residue sensitive areas on printed circuit boards during high temperature operations suchtemperature operations such

as wave soldering and solder reﬂow.

Storage and Shelf Life

To obtain best performance, use this product within 18 months from date of delivery and store under normal conditions

of 16° to 27°C (60° to 80°F) and 40 to 60% relative humidity in the original carton.

(2)

™

Low Static Polyimide Film Tape 7419

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only, and should not

be used for specification purposes.

3M™ Low Static Polyimide Film Tape 7419

Property Method Value

Adhesion to Steel D-3330, Part A

Initial 4 oz/in width (4.52 N/100 mm)

72 hrs @ Room Temp 5 oz/in width (5.65 N/100 mm)

10 min @ 260°C 17 oz/in width (19 N/100 mm)

Adhesion to Copper D-3330, Part A

Initial 4 oz/in width (4.52 N/100 mm)

72 hrs @ Room Temp 5 oz/in width (5.65 N/100 mm)

10 min @ 260°C 10 oz/in width (11 N/100 mm)

Backing Thickness D-3652 1.0 mil (0.025 mm)

Total Tape Thickness D-3652 1.8 mil (0.046 mm)

Static Discharge

Removal from roll

— < 100 volts

Dielectric Strength — 6000 volts

Surface Resistivity ESD Method S-11 5 x 10

ohms/sq

Temperature Use Range* — 10 min at 260°C

* Temperature use range is defined as the maximum time at the stated temperature after which the 3M tape 7419 may be removed cleanly,

without staining, from a copper substrate.

General Information

• Splice-free maximum roll length is 36.1 yd -0/+.2 yd (33 m -0/+2 m).

• Typical slit roll width tolerance: target ± .031 in (± 0.8 mm).

• Product provided on plastic polyethylene cores and individually packed.

Core ID = 3.020 in ± .004 in (76.7 mm ± 0.1 mm).

• Substrate should be smooth, clean, dry and oil-free to ensure good wet-out and adequate adhesion.

• Tape may not bond or conform to low surface energy, rough or sharply curved surfaces.

(3)

Regulatory

For regulatory information about this product, contact your 3M representative.

Technical Information

The technical information, recommendations and other statements contained in this document are based upon tests

or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.

Product Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance

of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M

product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose

and suitable for user’s method of application.

Limitation of Liability

Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether

direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,

negligence or strict liability.

Warranty, Limited Remedy, and Disclaimer

Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature,

3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product.

3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED

WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product

does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product

or refund of the purchase price.

Safety Data Sheet

Consult Safety Data Sheet before use.

DuPont™ and Kapton

are trademarks of E. I. du Pont

de Nemours and Company or its affiliates.

3M is a trademark of 3M Company.

Please recycle.

60-5002-0112-8

Electronics Materials Solutions Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

1-800-251-8634 phone

651-778-4244 fax

www.3M.com/electronics

™

Low Static Polyimide Film Tape 7419

P1-P3

7419

Mfr. #:

Buy 7419

Manufacturer:

Heyco

Description:

Cable Glands, Strain Reliefs & Cord Grips MSR-2A METAL STRAIN RELIEF

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

7419