https://www.phoenixcontact.com/us/products/1419690
12/14/2015Page2/5
Flush-type connector-SACC-DSI-M12FS-8CON-M16/0,5-1419690
Technical data
General
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Signal type/category Universal
Status display No
Overvoltage category II
Pollution degree 3
Connection method Individual wires
Insertion/withdrawal cycles > 100
Torque 3 Nm ... 4 Nm (Installation-side)
Mounting type Rear mounting M16 x 1.5 With flat nut
Material
Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA 66
Material, knurls Zinc die-cast, nickel-plated
Sealing material FKM
Cable
Cable type TPE litz wire
Conductor cross section 0.25 mm²
AWG signal line 24
Conductor structure signal line 14x 0.15 mm
Core diameter including insulation 1.15 mm ±0.07 mm
Thickness, insulation 0.21 mm
Wire colors Brown, blue, white, gray, pink, red, yellow, green
Material conductor insulation TPE
Conductor material Tin-plated Cu litz wires
Insulation resistance ≥ 20 MΩ*km
Conductor resistance ≤ 80 mΩ/m
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
