SNMP/Web Interface Card, Remote Cooling
Management
MODEL NUMBER: SRCOOLNET2
Installs inside select Tripp Lite air conditioning units to let you monitor temperatures, receive alerts, review
logs and control settings over the Ethernet network from any location via SNMP, SSH, telnet or web
browser.
Description
The SRCOOLNET2 SNMP/Web Interface Card adds remote monitoring and management capabilities to
select Tripp Lite air conditioning units, including the SRCOOL7KRM. By installing the SRCOOLNET2 into
the unit’s accessory slot, you will be able to control the cooling unit over the Ethernet network from any
location via SNMP, SSH, telnet or web browser. Monitor temperatures, adjust fan speed, and activate
dehumidification modes. You can also review logs remotely and receive alerts. LEDs confirm network
connection, speed and card initialization. The included ENVIROSENSE® module connects to the
SRCOOLNET2’s PS/2 port to monitor temperatures and humidity up to 12 feet away from the primary unit,
allowing its operation to be based on the intake air temperature where the sensor is mounted. The
ENVIROSENSE also lets you monitor smoke detectors, fire alarms and security systems through a dry-
contact interface.
Features
Control Your Cooling Unit from Anywhere
Turn select in-rack (such as Tripp Lite SRCOOL7KRM) and portable air conditioning units into a
managed network device
●
Access unit via SNMP, SSH, telnet or web browser
●
Monitor temperatures
●
Adjust fan speed
●
Activate dehumidification modes
●
Review logs
●
Receive alerts
●
Highlights
Enables remote management of
Tripp Lite air conditioning unit
●
Controls temperature, fan speed
and dehumidification modes
●
Sends alerts in case of power
failure, high temperature, etc.
●
Installs easily in unit’s accessory
slot
●
Includes ENVIROSENSE
temperature and humidity
sensor
●
Package Includes
SRCOOLNET2 SNMP/Web
Interface Card
●
ENVIROSENSE module
●
Configuration cable (73-1025)
●
MAC address label (located on
SRCOOLNET2)
●
Owner’s Manuals
●
1 / 3
