PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
ProtektivePak.com
DRAWING NUMBER
37670
DATE:
August
2012
PRO-MATS
© 2012 DESCO INDUSTRIES INC.
Employee Owned
Made in America
Features
• Rtt 1 x 10E6 < 1 x 10E9 ohms, meets worksurface recommendation of ANSI/ESD S4.1
• Economical ESD worksurface or shelving
• Meets required limits of ANSI/ESD S20.20 for worksurface and for shelving
• Low charging antistatic, dissipative surface
• Includes two 10mm (3/8”) male stud or female socket grounding snaps
• Chemical resistant
• Great choice for shelves and transportation carts, or for messy soldering applications
• Impregnated material; greater durability
• Made from 100% recycled material, and is 100% recyclable
• Made in United States of America
PROPERTIES TYPICAL VALUES TEST PROCEDURES/METHOD
Surface Resistance 1 x 10E6 < 1 x 10E9 ohms ANSI/ESD S4.1 and ESD TR53
Corrosivity Contains 1-3 ppm reducible sulfur FED-STD-101, Method 3005 for reducible sulfur
Sloughing Test Negligible surface damage at 10 cycles and <5% of surface ASTM D4060 at 70 rpm with CS-17 abrasive-coated
damage at 200 cycles in Taber Abrasion Test. wheels and 1000 grams load
No conductive particles abrased from surface Rockwell International Test Report of January 8, 1992
Recyclability Complete recyclability of package Rockwell International Test Report of January 8, 1992
Biodegradability Biodegradation in or on moist soil
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing
this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1.
See Protektive Pak Inc. letter on-line at
ProtektivePak.com.
“The most important functional consideration for worksurfaces is the resistance from the top
of the surface to the groundable point. This establishes the resistance of the primary path
to ground for items placed on the surface. When worksurface materials are being selected,
consideration should be given to possible CDM damage to ESD sensitive products. If CDM
damage is a concern, then setting a lower resistance limit for the worksurface should be
considered. Typically, the lower limit for these types of worksurfaces is 1 x 10E6 ohms.”
[ESD Handbook ESD TR20.20 Worksurface section 5.3.1.7 Electrical Considerations]
Pro-mat shown being used on
shelving and as a worksurface
Custom sizes available. Ask for quote.
AVAILABLE SIZES
Item Size - L" x W" x TH" Snap
37670 11-3/4 x 35-1/2 x 1/16 Male
39780 11-3/4 x 35-1/2 x 1/16 Female
37671 11-3/4 x 47-1/2 x 1/16 Male
39784 11-3/4 x 47-1/2 x 1/16 Female
37672 11-3/4 x 59-1/2 x 1/16 Male
39787 11-3/4 x 59-1/2 x 1/16 Female
37673 17-1/2 x 35-1/2 x 1/16 Male
39792 17-1/2 x 35-1/2 x 1/16 Female
37676 23-1/2 x 35-1/2 x 1/16 Male
39858 23-1/2 x 35-1/2 x 1/16 Female
37674 23-1/2 x 47-1/2 x 1/16 Male
39796 23-1/2 x 47-1/2 x 1/16 Female
37675 23-1/2 x 59-1/2 x 1/16 Male
39800 23-1/2 x 59-1/2 x 1/16 Female
Specications and procedures subject to change without notice.
