20-101-0955 Datasheet 20-101-0955 | P1-P3

• Low-Cost Dev Kits

• Application Kits

• RabbitCores

• Latest Downloads

• Single-Board

Computers

• Rabbit Support

Forums

• Training/Events

RCM2200 RabbitCore®

Models RCM2200, RCM2210, RCM2250, RCM2260

Description

Our award-winning Ethernet-enabled RCM2200 RabbitCore microprocessor core module is a compact yet

powerful embedded control solution for application developers working with a small design footprint. Only half the

size of a credit card, the RCM2200 features the powerful Rabbit® 2000 microprocessor, 256K of Flash memory,

128K of SRAM, 4 serial ports, 26 I/O, real-time clock, and integrated Ethernet. (To permit parallel development

and cost-effective implementation of both Ethernet-enabled and non-Ethernet systems, our pin-compatible

RCM2300 model is also available.)

Features

Compact size (2.3" x 1.6" x 0.86")

10Base-T Ethernet

Up to 512K Flash

Up to 512K SRAM

26 general-purpose I/O

Designing with RabbitCores

The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and

implementation of embedded systems. RabbitCores are powered by high-performance 8-bit Rabbit

microprocessors with extensive integrated features and a C-friendly instruction set designed for use with the

Dynamic C® development system. The RabbitCore mounts on a user-designed motherboard and acts as the

controlling microprocessor for the user's system. Small in size but packed with powerful features, these core

modules give designers a complete package for control and communication.

Large View | 360° View

RCM2200 Description

RCM2200 Specifications

iew Cart

e 1 of 3RCM2200 RabbitCore®

Products

Rabbit

10/15/2008htt

://www.rabbit.com/

roducts/rcm2200/index.shtml

The integrated Ethernet port frees designers from the limitations of serial-port communications and control and

also permits instant local or worldwide connectivity using low-cost networking hardware. Embedded systems

using the Ethernet RabbitCore module can be controlled and monitored (as well as programmed and debugged

when using appropriate accessory hardware) across any network or the Internet.

RCM2200 CoreModule Specifications

Features RCM2200 RCM2210 RCM2250 RCM2260

Microprocessor

Rabbit 2000T at 22.1 MHz

Ethernet Port

10Base-T, RJ-45, 2

LEDs

10Base-T

(raw signals only)

10Base-T, RJ-45, 2

LEDs

10Base-

T, (raw

signals

only)

Flash

256K 512K

SRAM

128K 512K

Backup Battery

Connection for user-supplied battery (to support RTC and SRAM)

General Purpose I/O

26 parallel I/O include:

16 configurable I/O

7 fixed inputs

3 fixed outputs

Additional Inputs

2 Startup Mode, Reset

Additional Outputs

Status, Reset

Memory I/O

4 address, 8 data, plus I/O Read-Write

Serial Ports

Four 5 V CMOS-compatible, 2 configurable as clocked ports (1 clocked line available

only on programming header)

Serial Rate

Max. burst rate = CLK/32

Max. sustained rate = burst/2

Connectors

Two 2 x 13, 2 mm IDC headers

Slave Interface

Slave port permits use as master or as intelligent peripheral with other master

controller

Real-Time Clock

Yes

Timers

Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match

registers

Watchdog/Supervisor

Yes

Power

4.75-5.25 V DC, 134 mA

Operating Temp.

-40°C to +70°C

Humidity

5-95%, non-condensing

Board Size

2.3" x 1.6" x 0.86"

(59 mm x 41 mm x 22 mm)

Part Number

20-101-0454 20-101-0488 20-101-0494 20-101-

0955

Development Kit

U.S. 101-0475, Int'l 101-0476

e 2 of 3RCM2200 RabbitCore®

Products

Rabbit

10/15/2008htt

://www.rabbit.com/

roducts/rcm2200/index.shtml

e 3 of 3RCM2200 RabbitCore®

Products

Rabbit

10/15/2008htt

://www.rabbit.com/

roducts/rcm2200/index.shtml

P1-P3

20-101-0955

Mfr. #:

Buy 20-101-0955

Manufacturer:

Digi International

Description:

System-On-Modules - SOM RCM2260 RABBITCORE MODULE

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

20-101-0955