www.fairchildsemi.com 2
FST32X245
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
(Note 3)
Note 1: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
Note 2: The input and output negative voltage ratings may be exceeded if
the input and output diode current ratings are observed.
Note 3: Unused control inputs must be held HIGH or LOW. They may not
float.
DC Electrical Characteristics
Note 4: Typical values are at V
CC
= 5.0V and T
A
= +25°C
Note 5: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the
voltages on the two (A or B) pins.
Note 6: Per V
CC
pin.
Note 7: Per TTL driven input, control pins only.
Supply Voltage (V
CC
) −0.5V to +7.0V
DC Switch Voltage (V
S
) −0.5V to +7.0V
DC Input Voltage (V
IN
) (Note 2) −0.5V to +7.0V
DC Input Diode Current (l
IK
) V
IN
< 0V −50mA
DC Output (I
OUT
) Sink Current 128mA
DC V
CC
/GND Current (I
CC
/I
GND
) +/− 100mA
Storage Temperature Range (T
STG
) −65°C to +150 °C
Power Supply Operating (V
CC
) 4.0V to 5.5V
Input Voltage (V
IN
)0V to 5.5V
Output Voltage (V
OUT
)0V to 5.5V
Input Rise and Fall Time (t
r
, t
f
)
Switch Control Input 0 ns/V to 5 ns/V
Switch I/O 0 ns/V to DC
Free Air Operating Temperature (T
A
) −40 °C to +85 °C
Symbol Parameter
V
CC
(V)
T
A
= −40 °C to +85 °C
Units Conditions
Min Typ
(Note 4)
Max
V
IK
Clamp Diode Voltage 4.5 −1.2 V I
IN
= −18 mA
V
IH
HIGH Level Input Voltage 4.0–5.5 2.0 V
V
IL
LOW Level Input Voltage 4.0–5.5 0.8 V
I
I
Input Leakage Current 5.5 ±1.0 µA0 ≤ V
IN
≤ 5.5V
010µAV
IN
= 5.5V
I
OZ
OFF-STATE Leakage Current 5.5 ±1.0 µA0 ≤ A, B ≤ V
CC
R
ON
Switch On Resistance 4.5 4 7 Ω V
IN
= 0V, I
IN
= 64 mA
(Note 5) 4.5 4 7 Ω V
IN
= 0V, I
IN
= 30 mA
4.5 8 15 Ω V
IN
= 2.4V, I
IN
= 15 mA
4.0 11 20 Ω V
IN
= 2.4V, I
IN
= 15 mA
I
CC
Quiescent Supply Current (Note 6) 5.5 3 µAV
IN
= V
CC
or GND, I
OUT
= 0
∆ I
CC
Increase in I
CC
per Input 5.5 2.5 mA One Input at 3.4V
(Note 7) Other Inputs at V
CC
or GND