www.panduit.com
FiberRunner
®
24x4 Routing System
SPECIFICATION SHEET
applications
technical information
specifications
The 24x4 routing system shall be a system of channel,
fittings, covers, and brackets designed to segregate, route,
and protect fiber optic and high performance copper cabling.
Channel and fittings shall be installed using pre-assembled
couplers. Fittings maintain a minimum 3" bend radius to
protect against signal loss due to excessive cable bends.
Available system colors shall be yellow, orange, and black.
Brackets shall be available for attaching system components
to 1/2" threaded rod.
The FiberRunner
®
24x4 Routing System is a system
of channel, fittings, covers, and brackets designed to
route, manage, and protect fiber optic and high
performance copper cabling above network racks
and cabinets within data centers and service
provider facilities. Because of its larger capacity, the
24x4 system is used to route higher cable counts.
Channel and fittings are assembled using timesaving
Panduit
®
QuikLock
™
Couplers. Fittings maintain a 3"
bend radius to protect against signal loss due to
excessive cable bends. Available system colors are
yellow, orange, and black to differentiate various
types of cabling.
The FiberRunner
®
24x4 Routing System is part of
the Panduit complete fiber distribution system, which
includes the FiberRunner
®
12x4, 6x4, 4x4, and 2x2
Routing Systems, the Fiber-Duct
™
4x4 and 2x2
Routing Systems, Wyr-Grid
™
Overhead Cable Tray
System and cable management products and racks.
Fittings, Covers, and Spillouts
QuikLock
™
Coupler: FRBC24X4**
Horizontal tee
with 12" exits: FRT24X4W12**
Horizontal tee with
12" exits cover: FRTCV24W12**
Horizontal 45°: FRH4524X4**
Horizontal 45°
cover: FRH45CV24**
Inside
vertical 45°: FRIV4524X4**
Outside
vertical 45°: FROV4524X4**
Outside vertical
45° cover: FROV45CV24**
4-way cross: FRFWC24X4**
4-way
cross cover: FRFWCCV24**
4-way cross
with 12" exits: FRFWC24X4W12**
4-way cross with
12" exits cover: FRFWCCV24W12**
End cap: FREC24X4**
24" to 12"
reducer: FRRF2412**
24" to 12"
reducer cover: FRRF2412CV**
Spill-over
with 4x4 exit: FRSPJ4X4**
Spill-over
with 2x2 exit: FRSPJ2X2**
3-sided BRC
trumpet for
24x4 exit: FRTR24X4**
Mounting Brackets
Trapeze bracket
for new ½"
threaded rod: FR24TBN12
Trapeze bracket
for existing ½"
threaded rod: FR24TBE12
Strut clip kit: FRSTRCLIP
Two-piece
ladder rack
bracket for ½"
threaded rod: F2PCLB12
**Substitute YL = Yellow, OR = Orange,
BL = Black.
Channel and Cover
24x4 channel
(10'): FR24X4**10
24x4 snap-on
cover (10'): FRCV24**10
Dimensions are in inches
(Dimensions in parentheses are metric)
Open channel Cable No. of Cables
50% fill capacity 1.6mm 15,820
(4" pile up) 2.0mm 10,124
3.0mm 4500
Fiber Optic
Ribbon Interconnect 5.20mm 1494
Category 6 6.35mm 1004
Category 6A 7.75mm 707
Material: Rigid PVC (channel), ABS (fittings)
Flammability: 94V-0
Approvals: UL Listed to 2024A Optical Fiber Cable Routing Assemblies (Does not include
24x4 covers)
RoHs
CSI spec form: LP-CSISPEC-FR
4.48
(114mm)
25.38
(644.6mm)
A = 96.8 in.
2
(63,613mm
2
)
key features and benefits
Rigid one-piece construction Molded and extruded solid components increase the strength and
integrity of the system; reduces cost of ownership and enhances
network reliability
Channel length Solid one-piece channel is provided in 10' lengths, reducing the use of
couplers and simplifying installation
Channel covers Snap-on channel cover is provided in four 30" lengths (totaling 10')
to facilitate rapid cover installation and ease of handling
QuikLock
™
Couplers No bolts need to be tightened and no tools are required when
and Brackets installing the QuikLock
™
Couplers; ready to use right from the
package; speeds installation and reduces cost
Wide selection of directional Offers multiple configuration options; provides design flexibility and
fittings and spillouts scalability to meet wide range of applications.
Fitting covers Channel and fitting covers protect cabling and provide fast and easy
access for future cabling moves, adds, and changes
Cable protection A minimum 3" bend radius maintained throughout all fittings prevents
excessive bends in fiber optic cabling
