OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

108402-HMC490LP5

P1-P3P4-P6P7-P8
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIER - SMT
4
HMC490LP5 / 490LP5E
v04.0213
GaAs pHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
Absolute Maximum Ratings
Drain Bias Voltage (Vdd1, Vdd2, Vdd3) +5.5V
Gate Bias Voltage (Vgg) -4 to 0V
RF Input Power (RFIN)(Vdd = +5V) +10 dBm
Channel Temperature 175 °C
Continuous Pdiss (T = 85 °C)
(derate 17.9 mW/°C above 85 °C)
1.6 W
Thermal Resistance
(channel to ground paddle)
56 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Vdd (V) Idd (mA)
+3.0 140
+3.5 154
+4.0 168
+4.5 188
+5.0 200
+5.5 208
Typical Supply Current vs. Vdd
Note: Amplier will operate over full voltage ranges shown
above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Reverse Isolation vs. Temperature
-70
-60
-50
-40
-30
-20
-10
0
10 11 12 13 14 15 16 17 18
+25 C +85 C -40 C
ISOLATION (dB)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIER - SMT
5
HMC490LP5 / 490LP5E
v04.0213
GaAs pHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC490LP5 Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
H490
XXXX
HMC490LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H490
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Outline Drawing
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIER - SMT
6
HMC490LP5 / 490LP5E
v04.0213
GaAs pHEMT MMIC LOW NOISE
HIGH IP3 AMPLIFIER, 12 - 16 GHz
Pin Descriptions
Application Circuit
Pin Number Function Description Interface Schematic
1, 2, 6 - 12,
14 - 19, 23, 24,
26, 27, 29 - 31
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
3, 5, 20, 22 GND
Package bottom must also
be connected to RF/DC ground.
4 RFIN
This pad is AC coupled
and matched to 50 Ohms.
13 Vgg
Gate control for amplier. Adjust to achieve Idd of 200 mA.
Please follow “MMIC Amplier Biasing Procedure”
Application Note. External bypass capacitors of 100 pF and
0.01 µF are required.
21 RFOUT
This pad is AC coupled
and matched to 50 Ohms.
25, 28, 32 Vdd3, 2, 1
Power Supply Voltage for the amplier. External bypass
capacitors of 100 pF and 0.01 µF are required.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P8

108402-HMC490LP5

Mfr. #:
Buy 108402-HMC490LP5
Manufacturer:
Analog Devices Inc.
Description:
BOARD EVAL HMC490LP5E
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet