2
DURA-MARK
™
PTR2 Printer Supplies
*Order number of rolls required in multiples of Std. Pkg. Qty.
Part
Number
Diameter
In. (mm)
Marker
Width
In. (mm)
Markers
Per
Row
Nominal
Cable O.D.
In. (mm) Material Color
Mkrs
Per
Roll
Std.
Pkg.
Qty.*
LHS12W1
0.13 (3.2) 2.00 (50.8) 1
0.04 - 0.13
(1.1 - 3.2)
3:1
Flattened
Poly ol efi n
White
500 1
LHS12W2
0.13 (3.2) 1.00 (25.4) 2 1000 1
LHS12W4
0.13 (3.2) 0.50 (12.7) 4 2000 1
LHS25W1
0.25 (6.4) 2.00 (50.8) 1
0.08 - 0.25
(2.1 - 6.4)
500 1
LHS25W2
0.25 (6.4) 1.00 (25.4) 2 1000 1
LHS25W4
0.25 (6.4) 0.50 (12.7) 4 2000 1
LHS50W1
0.50 (12.7) 2.00 (50.8) 1
0.17 - 0.50
(4.2 - 12.7)
500 1
LHS50W2
0.50 (12.7) 1.00 (25.4) 2 1000 1
LHS100W1
1.00 (25.4) 2.00 (50.8) 1
0.33 - 1.00
(8.4 - 25.4)
250 1
LHS100W2
1.00 (25.4) 1.00 (25.4) 2 500 1
LHS12Y1
0.13 (3.2) 2.00 (50.8) 1
0.04 - 0.13
(1.1 - 3.2)
3:1
Flattened
Poly ol efi n
Ye ll ow
500 1
LHS12Y2
0.13 (3.2) 1.00 (25.4) 2 1000 1
LHS12Y4
0.13 (3.2) 0.50 (12.7) 4 2000 1
LHS25Y1
0.25 (6.4) 2.00 (50.8) 1
0.08 - 0.25
(2.1 - 6.4)
500 1
LHS25Y2
0.25 (6.4) 1.00 (25.4) 2 1000 1
LHS25Y4
0.25 (6.4) 0.50 (12.7) 4 2000 1
LHS50Y1
0.50 (12.7) 2.00 (50.8) 1
0.17 - 0.50
(4.2 - 12.7)
500 1
LHS50Y2
0.50 (12.7) 1.00 (25.4) 2 1000 1
LHS100Y1
1.00 (25.4) 2.00 (50.8) 1
0.33 - 1.00
(8.4 - 25.4)
250 1
LHS100Y2
1.00 (25.4) 1.00 (25.4) 2 500 1
Heat Shrink Wire and Cable Markers
• Produce durable, high quality permanent heat shrink markers
• Pre-cut tubing mounted on plastic carrier
• Shrink Ratio 3:1 @ 212°F (100°C)
• Flammability: Meets U.L. Standard 224 for flammability
• For best results, print with TTRW-BL Wax Ribbon
• Used with Panduit Heat Shrink Tools and Accessories shown
below
*Order number of heat shrink accessories required in multiples of Std. Pkg. Qty.
Part
Number Description
Std.
Pkg.
Qty.*
HSG-115V-500
General P ur pose Tool – Air intake regulator varies temperature
from 500°F (260°C) to 620°F (344°C), 115 Volt, 11 AMP.
Neoprene jacketed cord with molded strain relief
1
HSG-115V-300
Low Temperature Tool – For use on small sizes of heat shrink
when under or near heat sensitive items. Air intake regulator varies
temperature from 300°F (145°C) to 450°F (232°C), 115 Volt, 8 AMP.
Neoprene jacketed cord with molded strain relief
1
HSG-A1
Shrink tube reflector for tubing up to 0.75" (19.1 mm) inside
diameter – Directs heat around the tubing to reduce shrink time.
1
HSG-A2
Shrink tube reflector for tubing up to 1.50" (38.1 mm) inside diameter
– Directs heat around the tubing to reduce shrink time.
1
HSG-A3
Shrink tube concentrator – Directs heat toward tubing
and away from heat sensitive items.
1
HSG-A4
Black polyethylene case – Stores heat tool,
stand and all three accessories.
1
Heat Shrink Tools and Accessories
• For use with all Panduit Heat Shrink Markers
• Other Heat Shrink Tools and replacement parts available. Contact factory for details.
See page 8 for complete material specifications