VJ5601M915MXBSR

VJ5601M915MXBSR
www.vishay.com
Vishay Vitramon
End of Life – Last Available Purchase Date: 20-Aug-2017
Revision: 07-Mar-17
4
Document Number: 45208
For technical questions, contact: chipantenna@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ5601M915 ASSEMBLY GUIDELINES
1. Mounting of antennas on a printed circuit board should
be done by reflow soldering using the profiles shown
(Figures 8, 9, and 10)
2. In order to provide the adequate strength between the
antenna and the PCB apply of a dot of heat cured epoxy
glue in the center of the footprint of the antenna prior to
soldering the antenna to the board. An example for such
glue is Heraeus PD 860002 SA. The weight of the dot
should be 5 mg to 10 mg.
Fig. 10 - Soldering IR Reflow with SnAgCu Solder
Note
(1)
The VJ5601M915 kit is available for evaluation. For samples, please contact mlcc-samples@vishay.com.
0
50
100
150
200
250
300
T
(°C)
Time
60 s to 120 s
30 s to 60 s
Max. temperature
Min. temperature
Sn-Ag-Cu solder paste
60 s to 120 s
60 s to 120 s
ORDERING INFORMATION VISHAY MATERIAL PACKAGING QUANTITY
VJ5601M915 Chip Antenna VJ5601M915MXBSR 1000 pieces
VJ5601M915 Evaluation Kit
(1)
VJ5601M915MXBEK 1 kit
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

VJ5601M915MXBSR

Mfr. #:
Manufacturer:
Vishay
Description:
Antennas SMD Ceramic Chip Antennas for 915 MHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet