THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
.250 6.35
REF
.085 2.16
.025
SQ
0.64
REF
"A"
"A"
IPT1-50-D
C1
FIG 1
(IPT1-125-01-XX-D-XXX SHOWN)
(SEE NOTE 11)
.200 5.08
REF
((No OF POS x .1000 [2.540])
+ .0200[.508])
.010[.25]
.060 1.52
.100
REF
2.54
01
02
C
L
SEE NOTE 8
IPT1-1XX-XX-XX-D-XX
No OF POS PER ROW
-02 THRU -25
ROW SPECIFICATION
(SEE NOTE 11)
-D: DOUBLE (USE IPT1-XX-D-XX-X)
PLATING SPECIFICATION
-S: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT,
MATTE TIN TAIL
LEAD STYLE
SEE TABLE 1, SHEET 2
OPTION
(SEE NOTE 11)
-PL: POSITION #1 REMOVED
(USE IPT1-XX-D-P)
(SEE NOTE 12)
-FL: FRICTION LOCK [POS -05 THRU -25]
(USE IPT1-XX-D-FL-X & T-1S64-XX-X)
.155 3.94
REF
.020 0.51
REF
.100 2.54
(TYP)
2
MAX SWAY
SECTION "A"-"A"
SEE TABLE 1
19
20
01
02
(IPT1-110-01-X-D-PL SHOWN)
-PL: POLARIZED OPTION
IPT1-XX-D-P
-FL: FRICTION LOCK OPTION
(IPT1-110-01-X-D-FL SHOWN)
T-1S64-06-X
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3]
2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.100 DOUBLE ROW SHROUDED TERMINAL ASSEMBLY
BY:
IPT1-1XX-XX-XX-D-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
DEAN P
11-05-2002
2
1
SHEET SCALE: 1:0.4
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE, 510, 3/4 HARD
F:\DWG\MISC\MKTG\IPT1-1XX-XX-XX-D-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE CUT FLASH: .010[.25].
3. MINIMUM TERMINAL PUSH OUT FORCE: 2 lbs.
4. MAXIMUM VARIATION BETWEEN PIN ROWS: .005[.13].
5. "END WALLS" AFTER CUTTING SHOULD BE .010+/-.003[.25+/-.08].
6. PARTS TO BE BULK PACKAGED.
7. ALL DIMENSIONS TO BE ABOUT CENTERLINE WITHIN +/-.005[.13].
8. PRESENCE OF VOIDS IS OPTIONAL AND PATTERN TO WHICH THEY
OCCUR IS VARIABLE.
9. -T PLATING OPTION AVAILABLE FOR EXISTING CUSTOMERS ONLY.
10. NOTE DELETED.
11. STANDARD BODIES CAN BE CUT TO POSITION.
FOR -PL & -FL OPTIONS, BODIES MUST BE MOLDED TO POSITION.
12. FOR EXISTING CUSTOMERS ONLY, -POL CAN BE SUBSTITUED FOR -PL.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION V
